Part Location Diagram of 8184608 Whirlpool Vent Grille
See part 8 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Vent Grille

★★★★★
★★★★★
11 Reviews
$60.80
  In Stock
PartSelect Number PS392273
Manufacturer Part Number 8184608
Manufactured by Whirlpool
Product Description

Vent Grille Specifications

This black vent grille mounts on the top of the microwave above the door. Can be used on stainless models.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
KitchenAid, Whirlpool, Estate, Roper.
Part# 8184608 replaces these:
AP3133625, 920172, 8184608, 8169507, 8184608
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
5.0
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 26 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
old vent grill broken
Removed to screws from oven to grill. removed grill. put in new grill and replaced the two screws.
Other Parts Used:
  • Bobby from Shelley, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
474 of 481 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent Grille was broken and exterior door panel was completely cracked and part of it had fallen off.
I actually followed one of your previous buyers who had the same issue as I. Replacing the grille vent is easy. The door was just a little harder as I wanted to make sure I did not break the glass. Unscrewed and popped off the old pane and snapped the new one in place and put the screws back in. On a side note your site was very easy to use and easy to find the parts I needed quickly.
Other Parts Used:
Exterior Door Panel Charcoal Air Filters
  • Donna from Santa Paula, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
370 of 378 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
son bought home with microwave with missing parts
glass tray and support ring just went in and the grille just screwed in, and the microwave was like new
Other Parts Used:
RING-TURN Glass Cooking Tray
  • Susan from Vadnais Heights, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
366 of 376 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace vent grill and filters.
I went online and found the manual for this appliance and used the instructions, which were very helpful. The filters just pop out and the new ones fit right in. No tools were needed. For the vent grill, it was necessary to move the metal tabs back and forth a few times manually before they were properly placed in order to take the two screws, which hold the grill in place. I then loosely tightened the screws (so as not to crack the plastic grill)with a Phillips Head screwdriver. When my husband got up from his nap he was pleased to see the job completed without his help.:)
Other Parts Used:
Charcoal Filter Grease Filter
  • Elizabeth A from Culver City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
215 of 415 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was cracked, and handle was coming off
I removed the plastic exterior of the door. The plastic exterior has to be pried off. The handle is fastened to the new exterior plastic face, and this is snapped on.
Other Parts Used:
Exterior Door Panel Door Handle
  • Eric from Norfolk, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
88 of 168 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vent grill kept falling off because plastic tabs had broken off.
I got my 5 foot step-ladder and Phillips screw driver and removed two screws that were already there. I discarded the two metal clips because new metal clips are already inserted in the vent grill. I lined-up the vent grill on the microwave and screwed in the two screws. It's a perfect fit.

I'm a 62 year old woman, and if I can do it - anyone can. The vent grill arrived two days after I ordered it.
Other Parts Used:
  • DIANE from ROUND ROCK, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
76 of 137 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent Grille is plastic & keeps breaking
First I removed the two screws from the previous grille. When the part came-no screws were included. Second, the plastic hole that was pre-drilled was not open enough so I had to make it open so the screws would fit. Your part fit just great and we are defintely satisfied. I have had to replace this vent grille 2 times-don't think I will have to do this again. Thank you
Other Parts Used:
  • donna from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
72 of 137 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic breaks at screw connection
I just screwed the part in place. This is the third grill I've had to replace.
Other Parts Used:
  • stephen from woodbury heights, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
63 of 124 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic tabs caused grille to fall off
Very simple, just removed the screws and plates from the top of the microwave and reused the screws to secure the new piece.
Other Parts Used:
  • Keith from Mesa, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken vent Grille (plastic tabs snapped)
All you have to do is unscrew the clamps, remove the broken plastic pieces of tabs, fit the new grille into the slots on the bottom and put the two screws through the clamps at the top.
Other Parts Used:
  • Aaron from Trumbull, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
December 19, 2019
This Whirlpool microwave built in 2008. Needs a new vent grille. Is there a replacement ?
For model number MH117OXSS-2
PartSelect logo
Hi Barry, Thank you for your question. There are different colored grille listed under your model number. The part numbers for them are: Biscuit - PS1738255, Stainless - PS1486769, Black - PS2361025 and White - PS2361122. We hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
January 16, 2023
Does this Vent Grille come with the clips etc to fasten this to my Microwave?
For model number YKHMS155L
PartSelect logo
Hello Frank, thank you for your question. The Mounting Bracket PS993093 is sold individually. Good Luck and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rich
February 25, 2024
I am seeing there are two black colored vent grilles available for my Whirlpool microwave. Which one should I go with? The dimensions of my current vent grille are 29 1/2 wide x 3 1/4 tall x 1" deep. My microwave is from August 2005. I am also frequently replacing this grille because it keeps cracking about 5" in from the upper right corner. This area is not around a screw or mounting bracket.
For model number MH1150XMS2
PartSelect logo
Hi Rich, thank you for reaching out. The vent grill, part number PS391931, does not include the screws, and the vent grill, part number PS392273, includes the screws. If you already have the screws, then you may order the one that does not include the screws. We hope this information is useful!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Paul
June 26, 2023
Does PS392273 fit this model?
For model number KHMS155LSS1
PartSelect logo
Hi Paul, thank you for contacting us. The mentioned part does not fit with your model. The vent grille, part number PS897438, will work with your model. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
Al
April 17, 2018
Can i use part #ps392273 to replace part #897438. It is the vent grille.
For model number KHMS155LSS1
PartSelect logo
Hello Al, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS897438 (Manufacturer Part Number: 8205008). Hope this helps!

Was this helpful?
Thank you for voting!
Rena
October 17, 2019
Hi there, do you still carry vent grille parts fit for this microwave model? How does it attach to the microwave? Thanks
For model number KitchenAid YKHMS1850SS0
PartSelect logo
Hello Rena, thank you for inquiring. The only replacement Vent Grille available for your model microwave is stainless steel and is part number PS2355583. You must simply remove the screws for the old one, detach it, then line up the new one and screw it on. Good luck with your repair!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS392273
Manufacturer Part Number: 8184608
Brand
Model Number
Description
Whirlpool
GH4155XPS0
Microwave - Hood Combo
Whirlpool
GH4155XPS1
Microwave - Hood Combo
Whirlpool
GH4155XPS2
Microwave - Hood Combo
Whirlpool
GH4155XPS3
Microwave - Hood Combo
Whirlpool
IMH15XRQ1
Microwave - Hood Combo
Whirlpool
IMH15XRQ2
Microwave - Hood Combo
Whirlpool
IMH15XRS1
Microwave - Hood Combo
Whirlpool
IMH15XRS2
Microwave - Hood Combo
Inglis
IOR14XRD0
Microwave - Hood Combo
Inglis
IOR14XRD1
Microwave - Hood Combo
Inglis
IOR14XRD2
Microwave - Hood Combo
KitchenAid
KHMS145JBL0
Microwave
KitchenAid
KHMS145JBS0
Microwave
KitchenAid
KHMS145JBT0
Microwave
KitchenAid
KHMS145JWH0
Microwave
KitchenAid
KHMS147HBL0
Microwave
KitchenAid
KHMS147HBL1
Microwave
KitchenAid
KHMS147HBL2
Microwave
KitchenAid
KHMS147HBT0
Microwave
KitchenAid
KHMS147HBT1
Microwave
KitchenAid
KHMS147HBT2
Microwave
KitchenAid
KHMS147HSS0
Microwave
KitchenAid
KHMS147HSS1
Microwave
KitchenAid
KHMS147HSS2
Microwave
KitchenAid
KHMS147HWH0
Microwave
KitchenAid
KHMS147HWH1
Microwave
KitchenAid
KHMS147HWH2
Microwave
KitchenAid
KHMS155LBL0
Microwave
KitchenAid
KHMS155LBL1
Microwave
KitchenAid
KHMS155LBL2
Microwave
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service