Product Description
Detergent Dispenser Cover Kit Specifications
This kit also includes the lid hinge pin, spring, snap and latch.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher, Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, Roper, Maytag.
Part# 4387043 replaces these:
AP3108078, 3276, 4387043, 300115, 300155, 3368981, 3369060, 3373471, 4387043, 99989667
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jamie B - September 12, 2018
Verified Purchase
Didnt work as.expected
Parts were packaged fine but The sprimg was not big enough (the prongs that create the door to spring) so ended up the same as before i ordered it
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 7 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dispenser door would not open due to a broken spring
Removed the existing dispenser door, took off old spring. Slid new springs on pin, got it situated between the correct parts of the door. Popped it back on the pin inserts. Twisted spring into springing action position, voila. It was repaired. No repairmen. No additional costs, fees, nor extra time waiting on repairmen.
Other Parts Used:
-
LARA from Murfreesboro, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
34 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher had no water coming into the bottom of it
Took the old one off and replaced it with the new one we received from you. It was great because we received the part just in time to do the Thanksgiving dishes! Thanks PartSelect.
Other Parts Used:
-
Kathy from Kennedy, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench set
14 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch had broken on detergent dispenser cover
Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.
Other Parts Used:
-
Phillip D from Auburn, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge broke
All pieces just snap off and the new one just snap right back in place.
Remeber take a little time to do your repair correctly.
It is cheaper to repair an appliance than it is to replace.
Remeber take a little time to do your repair correctly.
It is cheaper to repair an appliance than it is to replace.
Other Parts Used:
-
David from Vancouver, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
7 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap door hinge broke
I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on
Other Parts Used:
-
Michael from Las Vegas, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
was just missing the door and spring
You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.
Other Parts Used:
-
craig from Columbia, TN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
4 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The previous rod holding the cup in place broke
Remove completely the old one and installed the new entire kit.
Other Parts Used:
-
Nicole from Newnan, GA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kira
June 19, 2023
Soap dispenser won’t open when running cycle. I replaced the spring but it still doesn’t open. What is the next logical replacement part or troubleshooting step?
For model number DUB8500X
Hi Kira, thank you for reaching out. Based on our understanding of the issue, we would suggest you check if the seal is sitting correctly, if the seal is out of position or has been repositioned, this can cause the dispenser flap to remain stuck. If this does not help, we recommend replacing the soap cup latch kit, part number PS382922, to fix this issue. We hope this solves your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Tom
July 25, 2021
Hi there, is this compatible with the model above? I can’t seem to find it on the cross reference chart listed. Thanks
For model number 66516669992
Hello Tom, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741342 for the Cover, Part #: PS11744874 for the Spring and Part #: PS11741308 for the Pin. The parts for this model are not sold as a kit. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Cathy
September 21, 2022
I need the door, spring, and rod for this model
For model number WDF520PADM5
Hello Cathy, Thank you for contacting us. We have researched the model number that you have provided and show that these parts are only available as part of the dispenser assembly, part# PS11757054. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS370872
Manufacturer Part Number: 4387043
Manufacturer Part Number: 4387043
Brand
Model Number
Description