Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Trena
November 7, 2018
I have an LG electric range. Everything works except the bake. It will turn on, but will not go above 100 degrees. Sometimes it will reach 350 but will decrease soon after. Everything else works perfect. I am not sure if i should replace the heating element, thermostat or temperature regulator. I have followed the instructions to reset the temperature already. It is not throwing any codes. LG referred me to you. Thank you!
For model number LRE30453ST
Hi Trena, thank you for your question. It is likely you might want to check your thermostat first, however you should test all of those parts to pin point exactly what is causing your issue. If all of those parts are fine, it might be your control board that is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
July 4, 2022
OVEN WILL NOT HOLD TEMPERATURE. HEATS UP BUT QUICKLY DROPS IN TEMP.
For model number LRE30453ST
Hi Ronald,
Thank you for your question. If the oven is not heating correctly, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
