LRE30451ST001 LG Range - Overview

Diagrams for LRE30451ST001

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: EBG61305805
$59.35
In Stock
Temperature Sensor
★★★★★
★★★★★
(5)
Part #EBG61305805
This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor internal temperatures and regulate heating or cooling elements accordingly. If your appliance is experiencing inconsistent temperature control, the sensor may be defective and can be tested using a multimeter for continuity. Refer to your user manual for exact placement and diagnostic procedures. Sold individually.
Microwave Thermostat – Part Number: 6930W1A003X
$33.93
In Stock
Bake Element – Part Number: MEE36593201
$181.62
In Stock
WINDOW,GLASS – Part Number: 4890W1N009H
$125.28
In Stock
WINDOW,GLASS
★★★★★
★★★★★
(2)
Part #4890W1N009H
This clear inner glass lets you see inside your LG oven while keeping the heat in. If your oven glass is cracked or chipped, replacing it helps restore energy efficiency and safe cooking. It’s made to fit specific LG models, so check your oven’s model number before installing. Easy to replace with basic tools.
FOOT – Part Number: 4778W1N001B
$21.95
In Stock
FOOT
Part #4778W1N001B
Range Oven Relay Control Board – Part Number: 6871W1N012B
$195.00
Special Order
Range Oven Relay Control Board
Part #6871W1N012B
Radiant Heater – Part Number: 5300W1R004A
$134.16
In Stock
Common Nut – Part Number: 1NHB0500032
$13.15
Special Order
Common Nut
Part #1NHB0500032
Screw – Part Number: 1TTL0402622
$13.15
Special Order
Screw
Part #1TTL0402622
Fan,Convection – Part Number: 5900W1N001B
$43.95
Special Order
Fan,Convection
Part #5900W1N001B
Screw,Customized – Part Number: 1SZZW1N006A
$13.15
On Order
Screw,Customized
Part #1SZZW1N006A
SWITCH,TACT – Part Number: EBF60663403
$39.55
Special Order
SWITCH,TACT
Part #EBF60663403

Common Symptoms of the LRE30451ST001

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No heat in oven mode
8 of 11 people found this instruction helpful.
  • Dennis from CARY, IL
  • A Bit Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Verified P/N with LG. Took a few days . They sent names of several suppliers, cost was almost double. Ordered part from P/S, here in 2 days. Watched video on you tube. Unplugged, took off back, unplugged bake element, removed power box. The opening for bake element is still attached to rear panel by tiny bits of sheet metal. Used Dremel w ith cut-off wheel to cut thru nibs & deburr opening. this panel has to be removed, it rests on bottom panel & is held in position by power box. Removed bake element carefully, front of element broken, tried to put new element in, would not fit. Had to grind notches in bottom panel down to clear supports on new element. This did the trick. back together quick & no problems. If had to do again estimate less than 1 hour.. By the way am 81 yrs. young.
Was this helpful?
Thank you for voting!
Oven would initially start to heat up but would not hold its temp
7 of 9 people found this instruction helpful.
  • Leonard from Plano, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and ordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.
Was this helpful?
Thank you for voting!
Glass heating element not working
2 of 2 people found this instruction helpful.
  • Paul from TRUMBULL, CT
  • Very Easy
  • 30 - 60 mins
  • Socket set
Very easy.1: Shut power to stove.
2: Remove 3 hex screws from oven to range top at underside of top.
3: Raise to from front and disconnect multi- connector at right rear of top.
4: flip over top and demoed 4 screws on hold down strap at each side.
5: Remove element from under strap.
6: Disconnect element from wir es./ remember where wires were connected. Connect multi connected from stove.
7: Replace strap and flip top, screw it back on, put power back on.
Only about 30 minutes even if you get a coffe break. Don’t even have to move stove.
Was this helpful?
Thank you for voting!