Shock Absorber
$44.31
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number
PS3583320
Manufacturer Part Number
4901ER2003A
Manufactured by
LG
Product Description
Shock Absorber Specifications
This is a replacement shock absorber for your washer. The shock absorber is approximately 10 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually. There are four shock absorbers on your washer. They support the tub and prevent it from shaking around. If your washer is shaking or making a lot of noise during operation, you may need to replace the shock absorber. It is important to determine if you have one or more shock absorbers that need replacement before you begin the repair. This is an OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG.
Part# 4901ER2003A replaces these:
AP5226074, 4901ER2001E, AGF69478177
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer tub shakes violently during spin cycle.
turn washer on it's side. dampers are visible from underneath. use needle nose pliers to "pinch" end of retaining pin and pull pin out. it will take some force to remove. i would recommend replacing all 3 as i had one that had a mounting tab broken off. i then realized the other dampers were bad. there should be resistance in the up and down motion. if not replace.
Other Parts Used:
-
charlie from LAUDERHILL, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jesse
December 10, 2019
Is there a way to function test the shock absorbers? In other words, how do we know they are bad?
For model number wm2650hwa
Hello Jesse, thank you for your question. Once the shock is removed you can check to see if they are bad by pulling the two parts of the shock apart. If its easy to pull the part needs to be replaced. If its very hard to pull apart they are fine. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kyle
January 13, 2020
Could blown shocks prevent this machine from running the high spin cycle with heavier loads due to, too much movement?
For model number WM2650HWA
Hi Kyle, thank you for your question. It could be effecting your rotor sensor and thus effecting the spin. However usually when you are having spinning issues you would want to look at your rotor sensor, lid latch, and your rotor itself. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
November 19, 2019
Does this parts come in with a hole sets?
For model number WM 1814CW
Hello Ken, Thank you for the question. The Shock Absorbers are sold individually. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3583320
Manufacturer Part Number: 4901ER2003A
Manufacturer Part Number: 4901ER2003A
Brand
Model Number
Description