Models > F1073ND

F1073ND LG Washer Dryer Combo - Overview

Sections of the F1073ND

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
CAP,DRAIN HOSE – Part Number: 5006EN3015A
CAP,DRAIN HOSE
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$10.25
  In Stock
LEG ASSEMBLY – Part Number: AFC72909305
LEG ASSEMBLY
PartSelect #: PS7788210
Manufacturer #: AFC72909305
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can...
$50.01
  In Stock
BEARING,BALL – Part Number: 4280EN4001B
BEARING,BALL
PartSelect #: PS11705911
Manufacturer #: 4280EN4001B
$59.86
  In Stock
HOLDER – Part Number: 4930EN3004A
HOLDER
PartSelect #: PS7785207
Manufacturer #: 4930EN3004A
$9.73
  In Stock
LOCKER,HOOK – Part Number: MFG62439301
LOCKER,HOOK
★★★★★
★★★★★
(1)
PartSelect #: PS7795714
Manufacturer #: MFG62439301
$28.77
  In Stock
HOSE,PUMP – Part Number: 5214EN3042P
HOSE,PUMP
PartSelect #: PS12749675
Manufacturer #: 5214EN3042P
$67.03
  In Stock
Switch Assembly,Pressure – Part Number: 6600FA1704X
Switch Assembly,Pressure
PartSelect #: PS3529257
Manufacturer #: 6600FA1704X
$77.66
  In Stock
CLAMP ASSEMBLY – Part Number: 4861EN3003A
CLAMP ASSEMBLY
PartSelect #: PS7785189
Manufacturer #: 4861EN3003A
$9.73
  Special Order
HANGER ASSEMBLY,PIVOT – Part Number: 4991EN3002A
HANGER ASSEMBLY,PIVOT
PartSelect #: PS7785269
Manufacturer #: 4991EN3002A
$9.59
  Special Order
Rotor Assembly – Part Number: 4413ER1001D
Rotor Assembly
PartSelect #: PS3522941
Manufacturer #: 4413ER1001D
$219.97
  In Stock
Shock Absorber – Part Number: 4901ER2003A
Shock Absorber
PartSelect #: PS3583320
Manufacturer #: 4901ER2003A
This is a replacement shock absorber for your washer. The shock absorber is approximately 10 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually...
$44.31
  In Stock
BELLOWS – Part Number: 4738EN2003A
BELLOWS
PartSelect #: PS3635587
Manufacturer #: 4738EN2003A
$45.32
  Special Order

Questions And Answers for F1073ND

Be the first to ask our experts a question about this model!

Common Symptoms of the F1073ND

[Viewing 1 of 1]
Leaking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washer tub shakes violently during spin cycle.
turn washer on it's side. dampers are visible from underneath. use needle nose pliers to "pinch" end of retaining pin and pull pin out. it will take some force to remove. i would recommend replacing all 3 as i had one that had a mounting tab broken off. i then realized the other dampers were bad. there should be resistance in the up and down motion. if not replace.
Parts Used:
Shock Absorber
  • charlie from LAUDERHILL, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!