Filter Guide MEA49050001

Official part for LG, Kenmore

A Bit Difficult 

1- 2 hours 

3535278-1-M-LG-MEA49050001-Filter Guide
Part Location Diagram of MEA49050001 LG Filter Guide
See part K330 in the diagram
( Grid squares measure 1x1 inch )
3535278-1-S-LG-MEA49050001-Filter Guide 3535278-2-S-LG-MEA49050001-Filter Guide 3535278-3-S-LG-MEA49050001-Filter Guide Part Location Diagram of MEA49050001 LG Filter Guide
Proudly Canadian
OEM badge Official OEM Part
$54.95
In Stock

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Filter Guide Specifications

This is a replacement lint screen guide for your dryer. The lint screen guide attaches to the front bulkhead and supports the lint screen. If your lint screen will not stay in place, or if you are noticing marks left on your clothes, a broken lint screen guide could be to blame. The lint screen guide is approximately 13 inches wide on its straight edge. It is made of plastic and is sold individually. This is an OEM part, directly from the manufacturer.
Part #MEA49050001
Manufactured by LG for LG, Kenmore

You May Also Need

Because heroes deserve fewer surprise re-installs.

$52.75
In Stock
$61.55
In Stock
$47.25
In Stock
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

A Bit Difficult 

1- 2 hours 

Rated by verified customers

What this part fixes:
  • Marks left on clothes
Works with the following products:
  • Dryer
  • Washer Dryer Combo
  • Washer
Part# MEA49050001 replaces these:
AP5071743

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

A Bit Difficult 

1- 2 hours 

Average repair rating from 7 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Filter parts chipped - replaced
52 of 92 people found this instruction helpful.
  • David from Annapolis, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Was this helpful?
Thank you for voting!
We have ruined hundreds and thousands of dollars the past decade on our LG typical detective lint filter!
26 of 27 people found this instruction helpful.
  • Stephanie from CLINTON, NY
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I watched a You Tube Video. It instructed me to take the top, front, and door off. Not necessary!!! But definitely unplug it as there is a moisture sensor attached inside this housing. Remove current Filter. Remove all screws holding the two key pieces in (Filter Cover and Guide). Disconnect the moisture sensor (mine is white wires connected to two metal prongs). Remove the Filter Cover and Filter Guide and discard. Get a long vaccum hose and remove all visible lint in the area below where the Filter Guide resides. Replace the Filter Guide and reconnect the moisture sensor, replace the Filter Cover. You may find it easier to snap these two pieces together before installing. Make sure the small plastic guides on the inside of the drum snap in tightly to the tei guide holes, then replace all screws. Note- Part Select does not send screws, so save your screws from the old parts and take note which are longer and go where. Tighten, but do not over tighten. If you were successful, the Filter Cover and Guide should be smooth with the edge of the drum and door. Install your new Filter, plug back in, and enjoy! I can FINALLY dry tank tops, open shoulder, and key hole tops, as well as sheets without my dryer eating them. Only problem is that I wish I had done it sooner. Note, I'm a female with no electrical or appliance repair experience. I did this on my lunch break and surprised my husband when he got home! Easy peasy!
Read less
Was this helpful?
Thank you for voting!
Lint screen and frame was torn up
19 of 23 people found this instruction helpful.
  • Clifford from HUNTINGTN BCH, CA
  • Really Easy
  • Less than 15 mins
Was initially going to order just the lint screen. Manufacturer notes said that there had been a redesign on that part so ordered all three pieces to ensure matching parts. On arrival it was just a matter of removing a few screws. Direct fit replacement!
Was this helpful?
Thank you for voting!
We needed a new lint filter and housing guide
14 of 17 people found this instruction helpful.
  • Helen from FORT WORTH, TX
  • Easy
  • 30 - 60 mins
  • Screw drivers
My only issue was that I paid almost $30 for overnight shipping , and Part Select only sent two of the three pieces overnight. I had to wait several more days for the final piece. When I asked that they refund the expedited shipping charge, I never got a response. Would probably go with another company next time.
Was this helpful?
Thank you for voting!
Lint filter and housing needed replacement
13 of 15 people found this instruction helpful.
  • Catherine from LINCOLN, CA
  • Very Difficult
  • More than 2 hours
Parts did NOT fit together well. Because plastic, didn't want to force the pieces together and break them. Ended up calling appliance repair and even he had some difficulty getting it all together and back into the dryer.
Was this helpful?
Thank you for voting!
Lint Screen Housing broke causing damage to clothing
12 of 15 people found this instruction helpful.
  • Steven from Kenduskeag, ME
  • Very Difficult
  • More than 2 hours
  • Screw drivers
Could not do repair since the parts that I ordered were different from the picture on this site. I have emailed them to which they replied with one email asking for some info. I sent that to them and have not heard anything back in the last 3 weeks. I have even sent reminder emails and still nothing. I can't use my dryer due to damaging clothing and can't replace parts due to being the wrong part. Partselect is not very good at getting answers for their customers. Expert repair help is something i don't think they have. Getting some answers would go a long way but i feel like i have been left in the dark.
Read less
Was this helpful?
Thank you for voting!
LG Cothes dryer lint filter screen developed a hole and needed to be replaced.
3 of 3 people found this instruction helpful.
  • Kenneth from HUNTINGTON, WV
  • Very Difficult
  • 1- 2 hours
  • Screw drivers
I ordered the lint filter screen and when it arrived it looked exactly like the old one. It should have been nothing more than remove the old one and slide the new one in place.

Unfortunately, the new screen was about 1/2" wider than the old one and would not fit into the guide. After consulting by phone with your parts expert, we confirmed the model number and serial numbers, and eventually concluded that a design change must have been made by the manufacturer. We thought the only solution would be to also purchase the corresponding filter guide. So I ordered the guide. When it arrived, I installed it - a very difficult installation requiring putting my head and one shoulder into the dryer in order to get the screws out. (A long arm with two elbows would be nice.) After I got the old guide out, I discovered that it was exactly like the new one - 1/2" too narrow for the new filter screen. I reinstalled the old guide and returned both parts.

The dryer filter screen still has a hole in it and I am now waiting for my refund. I have no idea how to solve the problem.

The filter screen part number is 24053607, order number 18265310.

The guide part number is 24145665, order number 18348658.

Model number: DLE3170W

Serial number: 603KWMK6T539
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #MEA49050001
Brand
Model Number
Description
LG
048231014465
Dryer - Dryer
LG
48231010009
Dryer
LG
48231010030
Dryer
LG
48231014465
Washer - Washer
Kenmore
79680512900
Dryer
Kenmore
79680518900
Dryer
Kenmore
79681022900
Dryer - Kenmore Dryer
Kenmore
79681028900
Dryer
Kenmore
79681029900
Dryer
Kenmore
79681182310
Dryer - DRYER
Kenmore
79681182311
Dryer - Kenmore Dryer 79681182311
Kenmore
79681282310
Dryer - DRYER
Kenmore
79681283310
Dryer - DRYER
Kenmore
79681362910
Dryer - Kenmore Dryer 79681362910
Kenmore
79681382410
Dryer - DRYER
Kenmore
79681383410
Dryer - DRYER
Kenmore
79681462910
Dryer - Kenmore Dryer 79681462910
Kenmore
79681463910
Dryer - Kenmore Dryer 79681463910
Kenmore
79681472210
Dryer - Kenmore Dryer Model 796.81472210 (79681472210, 796 81472210) Parts
Kenmore
79681473210
Dryer - Kenmore Dryer Model 796.81473210 (79681473210, 796 81473210) Parts
Kenmore
79681532110
Dryer
Kenmore
79681532210
Dryer - Kenmore Dryer Model 796.81532210 (79681532210, 796 81532210) Parts
Kenmore
79681538110
Dryer
Kenmore
79681538210
Dryer - Kenmore Dryer Model 796.81538210 (79681538210, 796 81538210) Parts
Kenmore
79681542110
Dryer
Kenmore
79681542210
Dryer - Kenmore Dryer Model 796.81542210 (79681542210, 796 81542210) Parts
Kenmore
79681548110
Dryer
Kenmore
79681548210
Dryer - Kenmore Dryer Model 796.81548210 (79681548210, 796 81548210) Parts
Kenmore
79681549110
Dryer
Kenmore
79681549210
Dryer - Kenmore Dryer Model 796.81549210 (79681549210, 796 81549210) Parts
Filter Guide
$54.95
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.