We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Douglas
September 1, 2017
Will not power on,I checked noise filter seems fine! 120v going in 120v coming out
For model number WM3455HS
Hi Douglas,
Thank you for the question. The locker switch assembly may be defective. The locker switch assembly is a part for your washing machine and tells the washer that the door is closed and locked into place. If the switch has shorted out and not locking, it is no longer delivering the message to the machine and it will not latch into place. If you find that your door will not close, open, or start, it is more than likely an issue with the locker switch assembly. The switch is located behind the front panel. You will need to remove the gasket to reach the switch.
Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Devon
January 14, 2019
Dishwasher has three light bar on screen but won't start its an LG
For model number LDS5540ST
Hello Devon, Thank you for the question. I suggest testing the switches on the door lock, PartSelect Number PS5574492. If the switches can not recognize the door is closed it will not allow it to start. Hope this helps, good luck with this repair!
The lights on the top do not come on when pressed. There is 110 going to the unit. What do I need to check?
For model number LDT99656BD
Hello Jim, thank you for your question. We have researched your model and found that the most likely fix to your problem is to change the noise filter, part number PS3528920. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
DONALD
April 7, 2023
On/Off button works sometimes and but mostly it doesn't no matter how many times it is pushed. All other switches work as advertised.
For model number wm2140cw
Hello Donald, thank you for contacting us. Based on our research, if the on/off button is not working, you may need to check the display power control board, part number PS3623244, to fix the issue. Before replacing the control board you may need to check whether the start button is properly pressed or not. We hope this solves your problem!
No power to unit. Wife said she smelled something burning and dishwasher shut down before she came out to investigate. Control panel or noise filter?
For model number LDF7774ST
Hello Scott, thank you for writing. We recommend checking to see if anything had fallen on the heating element PS7788065 like food debris or a plastic item. If the burning smelled " electrical" then it may be Electronic Control PS11710963. We hope this helps.
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No power to dishwasher. Confirmed that outlet had power coming out.
Turn off circuit breaker. Turn off water at shutoff valve usually located under sink. Disconnect water line from dishwasher. Disconnect wires for the power feed from cord, Marked corresponding wires upon removal for re-installation. Remove 2 mounting screws that secure dishwasher to counter. Slide dishwasher out from counter and turn upside down. Use a blanket to prevent scratching of surfaces. Locate component on the back portion of the dishwasher. Unplug 2 wiring harnesses. My part was held on by 2 phillip screws. One in front, the other in the back along the leg bracket support. Once removed, reverse the order of removal. The i a You Tube video you can locate fr this removal. They said that you needed to release a clip to get the part out. Mine had a screw holding it on the back side. This difference cause about an extra 1/2 hour before I was able to figure out that there was NO clip that was being shown on the video. After that, The replacement went smoothly and we were having the dishes washed later that day.
Other Parts Used:
JOHN from FORT MYERS, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg M - September 23, 2021
Verified Purchase
Quick repair and fixed my washing machine
Looked the exact same as old part, basically a plug and play. Makes my machine work again so I’m happy. Will be doing more business with you in the future
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3528920
Manufacturer Part Number: 6201EC1006T
