This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael B - December 27, 2020
Verified Purchase
Works great
Received in a few days and was a direct replacement for the old part.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 15, 2017
Part number: Ps3525704 how isdoes this part attach to my the drum in my washer? Is this pulsator cap what you see as you look into the drum of the washer in the center at the bottom. I want to make sure we are referencing the correct part. It's hard to tell by your diagram. Thanks!
For model number LG WT 1701 CW Washer
Hi Robert,
Thank you for your inquiry. Yes this would be the part that you would see when you look int the drum of the washer in the bottom center. You should be able to set the part in the middle and snap it into place. To remove it use a flat head screw driver to lift it out. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Loren
December 5, 2017
Both the washplate and the cap are no longer in place. Does this part hold it in place? Several pins have broken off. Or could something else be wrong?
Hello Loren,
Thanks for your question. This part fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Leigh
September 19, 2019
Our washer is leaving dark colored residue on our clothes. When i google, it suggests this part is cleaning the filter and i can’t find the filter. Any help would be greatly appreciated!
For model number Wt1501cw
Hello Leigh, thank you for your question. Unfortunately, there is not filter in this unit. We would recommend checking the Part #: PS12588963 Pulsator/Wash Plate and the nut and washer under the wash plate to be sure they are secure and to see if the residue is coming from under there. If it is, the issue may be the tub seal or the transmission seal. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
June 24, 2019
I need the bolt that tights up the pulsator
For model number WT5001CW
Hello Bruce, thank you for your question. The bolt that holds the pulsator is PartSelect Number PS3534421. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dennis
March 14, 2022
The washer go to 7 mins then returns back to 13 and the water comes in again.The machine will not spin out complete.thank you
For model number Wt1501cw
Hi Dennis,
Thank you for your question. If your washer is not working correctly, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock switch, the PCB display assembly and the PCB main assembly. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
