Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ken S - August 31, 2023
Verified Purchase
Good Part - Delivered Late
The part was exactly what I needed and looks to be good quality twine between the connectors. Reason for my lower rating is that I paid over $13 for shipping and it took over a week to arrive in the mail.
★★★★★
★★★★★
PETER G - August 19, 2022
Verified Purchase
Door draping too quickly
The connectors came quickly. They hooked easily into the existing springs. The total time was about 30 minutes.
★★★★★
★★★★★
Maro K - September 17, 2021
Verified Purchase
Very easy to repair. Worked like a charm!
Prompt delivery of part. Easy to fit. No complaints.
★★★★★
★★★★★
Arthur S - September 11, 2021
Verified Purchase
Was as expected
Part arrived earlier than expected and was exactly what I as I had seen in the parts list.
★★★★★
★★★★★
Serge R - April 6, 2021
Verified Purchase
Worked perfectly
The parts was perfect and it was very fast shipping.
★★★★★
★★★★★
Michael B - January 15, 2021
Verified Purchase
Worked as expected
Part worked. Deivery was a bit slow, probably because of Covid.
★★★★★
★★★★★
Ted H - December 25, 2020
Verified Purchase
Interesting part.
These are easy to install, no need to call an appliance repair guy. Just don’t yourself. If your dishwasher was installed with enough slack in the waterline and electric wire, no need to disconnect then pull out the dishwasher, remove the side panels and replace the cables. Done in 20 minutes.
★★★★★
★★★★★
Randy C - November 5, 2020
Verified Purchase
quick delivery, easy install with video shown.
It was shipped the next day and arrived in two days, great service and like the extra help with the video shown on your site.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 14 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher door became heavy and would fall to the floor if you didn't hold it up.
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while you have the dishwasher pulled out. Push dishwasher back in and mount with screws.
The hinge spring and/or connector assembly were not functioning, so the dishwasher door was extremely heavy.
Replacing the spring and connector assembly (the cord had frayed and broken) was easy and took only a matter of minutes to do. Wrestling the dishwasher in and out of its space under the counter was very difficult. Because my kitchen is compact, I had to move the refrigerator first, then disconnect the Romex cable and water lines from the dishwasher before I could pull it fully from under the counter. The side panels have screws in the front and the back, so the appliance had to be moved out until its back was exposed. But I got the job done and the door works just like a new one now!
Pull the dishwasher out from underneath the countertop took 2 minutes unscrewed the panel on the side one minute put the connector on one minute screwed the panel back on 1 minute put the dishwasher back underneath the counter two minutes very easy job
Other Parts Used:
Thomas from Palm coast, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was very heavy due to spring problem
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identically to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
Very easy just took out two screws that held the dishwasher to counter top.Then pulled dishwasher out just far enough that both door cables are exposed.The hardest part for me was getting the spring stretched enough to clip on.This was a easy installation for most people.
Other Parts Used:
Thomas from ELLIJAY, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our dishwasher door would drop open and land on our feet.
My husband was able to slide the dishwasher out, and quickly replace the old connector assembly for the new ones. The old connector assembly had broken at the “rope”. Now the door opens slowly and is as good as new.
Other Parts Used:
Amy from San Marcos, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DW door would fall when not latched
pulled dishwasher out of cabinet, removed side panel held by screws front and back, removed broken tension rope installed new rope, replaced side panel pushed dishwasher back into cabinet and fastened to countertop, door works like new now, (the chief cook is happy as she can be)
Other Parts Used:
Robert from DALTON, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front door would fall open without resistance.
The repair took right at one hour. Repair length of time will depend on what all you have to disconnect to get your dish washer out so you can remove both side panels where you will be able to access the door springs, etc. There is a door spring on each side and I recommend replacing both connectors cords while you have the dishwasher out. Mine were both broken. One thing I noticed when doing my repair was that the bracket that is on the bottom of the door was not aligned properly to the small pulley that the connector cords travels under. If yours is out of alignment you will be able to tell once you get the connector cord installed. I used heavy pliers to bend the bracket slightly inward so the connector cords rides in the center of the pulley and not off to the outside as before. This may be why mine broke in the first place. After part replacement, reinstall the door panels and put the washer back in service. There are also YouTube's of this repair so you can see what you are getting into. Basic repair.
Other Parts Used:
Ed from COHUTTA, GA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door to dishwasher would not open slowly. would slam open
connector was broken. just attached new connector to spring on each side of door. easy fix.
Other Parts Used:
Carol from Canterbury, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 11, 2018
What do I have to take off to replace this part?
For model number LDF9932ST
Hello Robert,
Thanks for your question. Pull the unit out to gain access to the sides of the appliance. Then you will be able to access the cables and they connect to the door hinges and springs. From there, push the spring up and remove it from the hinge's bracket. The tub is sharp so wear work gloves.
I hope this helps.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Gregory
April 4, 2019
Our door slams down when we open it. The door spring assembly went once before and it was a simple fix. The mechanic just attached what looked like a cord to the door spring. Do you still have this cord, and, if so what is the part number
For model number LDF8812ST
Hello Gregory, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS3524406. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joel Jacobson
July 16, 2019
Good morning i have a washer and i know the door spring cable is broke. Would this cause the washer not to work at all it starts up then puts an error code ie which looks like its water inlet issue. Is their some sort of switch hooked up the door cable issue>
For model number LDS5811st
Hello Joel, thank you for writing. The door spring cable will have nothing to do with the code. The code is indicating a water inlet failure. You will want to consider replacing either the Inlet Valve Assembly part PS9495756 or the Circulation Pump Motor part PS3523285 for your model. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Saeid
February 14, 2020
Hi, could you please tell me how many of this part do i need to repair the door.I have ordered on of each of this parts; lg4933dd300b (connector assembly) and lg490ed4004g (spring hinge).
thanks
Hi Saeid,
Thank you for your question. You will need 2 of each part. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keith
October 29, 2021
Washer starts, then shuts off within 1-2 minutes. Same on Rinse Only, Normal, Quick, Pot Scrubber
For model number LDS4821ST
Hi Keith,
Thank you for your question. If your washer is not working correctly, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock assembly, the noise filter assembly and the circulation pump and motor. You will find the information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
Dishwasher won’t power up, no lights etc. Have checked electric source and all is fine. Any advice
For model number Ldf7551st
Hello Dave, Thank you for the question. The most common issue with this symptom would be a defective Control Board, PartSelect Number PS11710961. Thank you for your inquiry, good luck with this repair!
my door to the dishwasher feels like a spring broke the door opens way to fast now.
For model number LDF7774ST
Hello Steve, thank you for reaching out. Your dishwasher may be facing this issue because of a broken door hinge spring. We recommend you replace the door hinge spring, part number PS3524564, to fix the issue. We hope this solves your problem!
Looking for door hinge rope assembly for my LG dishwasher Mod. LDF7561ST. Which part number should I order.
Thanks
Jack
For model number LDF7561ST
Hello Jack, thank you for contacting us. The door hinge cable assembly for your model is part number PS3524406. We hope this information helps!
Was this helpful?
Thank you for voting!
Carolyn
October 25, 2023
I am trying to replace the connector assembly
For model number LDS5040ST
Hello Carolyn, thank you for contacting us. We are providing you with the instructions that will help you in replacing the connector assembly. Remove the dishwasher from the cabinet. Pull down the spring to release the tension n the hinge rope and detach the old rope from spring and hinge. Install the new hinge by first hooking the rope with the spring. Now pull the spring down, loop the rope around the pulley and hook the opposite end onto the hinge. We hope this helps!
Was this helpful?
Thank you for voting!
Leo
February 18, 2020
Door is heavy and falls to the ground rapidly. I assume, after reading, that i should change the 2 springs and 1 connector assembly (or are they 2) ...i also have a leak where the latch is, not major but troublesome. i assume it is a gasket that needs replacement. are the part nos as follows: spring 4970ed4004g, connector 4933dd3001b, and gasket 3920dd3005a???
For model number LG Model LDS5811ST
Hello and thank you for writing.
Spring PS3524563
Connector Assembly PS3524406
The door gasket is NLA. We hope this helps. Please contact us anytime if you require further assistance.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3524406
Manufacturer Part Number: 4933DD3001B
