D1435WB LG Dishwasher - Overview

Diagrams for D1435WB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hinge Cable – Part Number: 4933DD3001B
$26.95
In Stock
Hinge Cable
★★★★★
★★★★★
(18)
Part #4933DD3001B
The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. If your dishwasher door isn’t closing properly you will need to replace this part. This part measures approximately 12” and is black and white in color. This is a genuine OEM part.
Dishwasher Roller Assembly – Part Number: 4581DD3003C
$13.15
In Stock
Dishwasher Roller Assembly
★★★★★
★★★★★
(8)
Part #4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Gasket – Part Number: 3920DD3005H
$69.25
In Stock
Gasket
★★★★★
★★★★★
(6)
Part #3920DD3005H
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cycle. It’s tough enough to handle heat and wear, and replacing it can fix common problems like water on the floor or poor wash results. Installation is simple—just press it into the groove around the door and you’re good to go.
Pump Gasket – Part Number: MFZ32863101
$18.11
In Stock
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
$51.65
In Stock
Drain Hose Assembly – Part Number: AEM69493807
$114.52
In Stock
Drain Hose Assembly
★★★★★
★★★★★
(7)
Part #AEM69493807
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
$80.25
In Stock
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(1)
Part #5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.
Hinge Spring – Part Number: 4970ED4004D
$34.05
In Stock
Dishwasher Locker Assembly – Part Number: 4027ED3002J
$64.85
In Stock
Dishwasher Locker Assembly
★★★★★
★★★★★
(2)
Part #4027ED3002J
If your dishwasher won’t start or is leaking during a cycle, the door latch might be the problem. This genuine LG latch assembly keeps the door closed tight, helping prevent water from escaping and making sure the machine runs properly. It’s located at the top of the door and is easy to replace—just unplug the dishwasher, turn off the water, and wear gloves. This original part is made to fit specific LG models, so be sure to check your model number before ordering. Once installed, your dishwasher should seal properly and start without issues.
Tub Seal – Part Number: 3920DD3002B
No Longer Available
Tub Seal
★★★★★
★★★★★
(1)
Part #3920DD3002B
Stop leaks and cut down on noise with this dishwasher door seal. It keeps water and heat inside the appliance while helping reduce sound during the wash cycle. If you notice water on the floor, odors escaping, or the door not sealing properly, replacing the gasket can solve the problem. Installing it is easy—just remove the old seal and press the new one into the groove. A quick fix for a quieter, more efficient dishwasher.
MOTOR ASSEMBLY,AC,PUMP – Part Number: EAU61383518
$116.78
In Stock
MOTOR ASSEMBLY,AC,PUMP
Part #EAU61383518
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water.

Common Symptoms of the D1435WB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher door became heavy and would fall to the floor if you didn't hold it up.
32 of 36 people found this instruction helpful.
  • Charles from DENNIS, MA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while yo u have the dishwasher pulled out. Push dishwasher back in and mount with screws.
Was this helpful?
Thank you for voting!
The hinge spring and/or connector assembly were not functioning, so the dishwasher door was extremely heavy.
11 of 14 people found this instruction helpful.
  • David from NEW ORLEANS, LA
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable)
Replacing the spring and connector assembly (the cord had frayed and broken) was easy and took only a matter of minutes to do. Wrestling the dishwasher in and out of its space under the counter was very difficult. Because my kitchen is compact, I had to move the refrigerator first, then disconnect the Romex cable and water lines from th e dishwasher before I could pull it fully from under the counter. The side panels have screws in the front and the back, so the appliance had to be moved out until its back was exposed. But I got the job done and the door works just like a new one now!
Was this helpful?
Thank you for voting!
Dishwasher leaking; got AE error almost every other wash
12 of 20 people found this instruction helpful.
  • Bruce from Katy, TX
  • Really Easy
  • 30 - 60 mins
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Was this helpful?
Thank you for voting!