The door hinge attaches the door to the front panel of the washer cabinet. If the door hinge is damaged, or faulty, the door may not close or open properly and can lead to the unit leaking during the wash cycle. This genuine OEM part is sourced directly from the manufacturer, made of stainless steel, and measures approximately 12 inches long x 6 inches wide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Leaking
This part works with the following products:
Washer.
This part works with the following products:
LG, Kenmore.
Part# 4775ER2002A replaces these:
AP4437239, 4775ER2002B, 4775ER2002D
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door Hinges, door lock assembly, frame door
Remove door assembly from the hinge, unscrewed screw from the panel. Leave couple screws to hold Hinges. Remove the rubber seal but stretching to spring out, not having rt tool (long nose plier). Remove rubber partially close to the hinge. Remove the Hinges and replaced it, then reverse putting together back. Use small screw driver to put spring tensioner back. Reinstall frame door to hinge, double check everything.
Other Parts Used:
Julius from WINNETKA, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maria
May 1, 2023
I am looking for a door hinge for my washer model # WM2688HCM Can you advise which one I need please
For model number WM2688HCM
Hi Maria, thank you for reaching out. The door hinge for your model is part number PS3523463. We hope this is what you were looking for!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nathan
September 30, 2023
Need a new door hinge. Just trying to find what hinge fits this model. Thanks!
Model number: WM2277HW
For model number WM2277HW
Hi Nathan, thank you for reaching out to PartSelect. The door hinge assembly compatible with your model is part number PS3523463. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Aldolphus
June 12, 2023
My front load washer door is leaking, any suggestions?
For model number WM2688HNM
Hi Aldolphus, thank you for the question. The bellow forms a seal between the wash tub and the door, preventing leaks. If it is broken, water will leak. We recommend you replace the bellow, part number PS3524978, to fix the problem. We hope this helps, good luck with this repair!
The door won’t lock without lifting bottom of door and closing with pressure. The hinge is clearly bent; but do I need the locking mechanism as well?
For model number Wm2240cw
Hey Gary, thank you for your inquiry. We have researched your model and found that replacing the hinge assembly, part number PS3523463, will fix the issue. If it is not taking care of the issue, then replace the door lock assembly, part number PS3533609. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Will this door hinge work for my machine I'm having trouble matching model#
Serial #103tnznok989 Door is sagging have to lift to close.
For model number WM3600hwa
Hello Linda, thank you for your question. For your model, the correct Hinge assembly is PS3618290. And, the Hinge Bracket is PS16223940. We are pleased to have been able to help.
