Heating Element Connection Wire Kit

Hello Chad, thank you for your question. If the wires that plug into the heating element have melted, I would definitely replace this wire kit. You may want to test the element as well, just in case the excessive heat damaged the element as well as the wire. I hope this helps!

Hi Brad, Thank you for the question. I suggest replacing the limits as well as the element. When the element burnt up it may have blew the limits. Good luck with the repair!

Hello James. Thank you for the question. Here is a link to the video on how to install the element. Hope this helps! https://www.youtube.com/watch?v=GtSdiY8S-Q8

Hi Beth, Thank you for your question. The reason the wire burned is because of a loose connection between the wire element and the heating element connection. You will need to replace the heating element and the connection wire. I hope this helps. Thank you and have a great day!

Hi Jane, Thank you for your question. If your dryer has stopped heating, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=11060022010&mfgModelNum=&fkMfgID=3&ModelMasterID=351757&PID=19. We hope this helps. Thank you and have a great day!

Hello Chris, Thank you for the question. This wire is just listed to connect the element. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.

Hi Ralph, thank you for contacting us. There are several reasons why your dryer may not be heating correctly. Some situations that may cause your dryer to not heat properly include a lack of power, an issue with the size of the load, or its wetness. Otherwise, the following parts need to be checked to solve this issue: thermal cut-off kit, part number PS334299, drive motor, part number PS334304, and heating element connection wire kit, part number PS334206. We hope this sorts out your problem!

Hello Nell, thank you for your question. Unfortunately, we do not have the size of the spade connector. Its recommended to replace the wire and connector provided by the manufacturer for that unit. I hope this helps!

Hello Chad, Thanks for your question. The F23 error code is due to an exhaust thermistor short. You will want to replace the internal-bias thermostat, part number PS11746740, to fix this issue. I hope this helps.

Hello Terry, thank you for your question. From the picture and description the wire nut is plastic not ceramic. This is what is recommended by the manufacturer directly. I hope this helps!