High Limit Thermostat - Limit 250-40 Specifications
With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 210 degrees Fahrenheit - the differential of 40 degrees.
I removed the old thermostat. One of the wires was fried. The new thermostat came with a new clip/connector so I cut the bad part of the wire out, stripped it back and attached the new connector. Then, I screwed the new thermostat in place and attached both connectors. The dryer has heat again. PartSelect.com got the correct part out to me in a short amount of time. Their repair help also helped me test and diagnose the problem in the first place.
Other Parts Used:
Mason from New Park, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
16 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
While removing 21 years of coins and lint I damaged the factory installed thermostat limit switch.
Remove damaged switch and install new one
Other Parts Used:
Peter from Richmond, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
March 22, 2019
Is there a way to test the high limit switch?
Hello Charles, thank you for your question. Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermostat should produce a reading of zero. But if a thermostat is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermostat at room temperature. If the test you conduct with your thermostat does not produce these results, then you should replace the component. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
How I Need Help Replacing My Old Park With This New Part The Old Part Had To Connectors The New Par
February 24, 2018
How do i connect my new replacement part?
For model number New replacement part 279052 for my old 341195 how do I connect the new part ? My old one has two wir
Hello, Thank you for your inquiry. Although we do not have a repair video for this exact part number, I have included links to our repair videos for similar high limit thermostats to assist you. Hope this helps!
https://www.youtube.com/watch?v=vYPpTd9v9FQ&t=0s&index=88&list=PL812EFA28A01FA86A
https://www.youtube.com/watch?v=GDQLr2EXogo&list=PL812EFA28A01FA86A&index=141&t=0s
https://www.youtube.com/watch?v=8iFZ4sCEyjI&t=0s&index=59&list=PL812EFA28A01FA86A
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mario
October 8, 2017
The dryer gets really hot and blows the thermal fuse. Will replacing the high limit thermostat - limit 250-40 resolve the problem?
For model number 11086545110
Hi Mario,
Thank you for your question. It very well could. I would suggest testing your thermostats to see if they are working correctly. You can do that using a multi meter. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. Th...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334126
Manufacturer Part Number: 279052