Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top had rusted out around the bleach dispenser and rusty water was getting in the clothes
Top panel was exactly what I needed and fit perfectly. To replace the top panel I first unplugged power. Removed control panel on top of machine. Removed front panel by placing a putty knife under front corners and pushing down on front panel. Removed two screws holding top panel to frame. Removed lid switch from top panel then removed lid from top panel. Lift up front of top panel and slide out of cabinet. Replaced new top panel in reverse order. The only thing I overlooked when ordering top panel was the plastic bumpers and rubber guides for the lid. Had to remove old parts from old top panel and use them. Overall job took about 45 minutes.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
October 15, 2017
Is there a hose attached to the underside of : Bleach funnel part #ps268447 ?
For model number GTWN5650F
Hi Ed, Thank you for the question. No the Bleach Funnel does not require a house. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
July 25, 2021
How can i repair the rust around the bleach cup. What paint/ epoxy would you use.
For model number GTWN3000M0WS
Hello Craig, Thank you for writing. Since touch up paint is only recommended for the top and lid of the washer and we do not have an epoxy listed for the bleach funnel, for more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.