This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD18X10008 replaces these:
AP3140329, 943448, WD18X10011
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.8
Filter By Rating:
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Avryl G - April 15, 2022
Verified Purchase
Worked as expected, fast delivery
We received exactly want we ordered, and the delivery was within 2 days. Happy with our purchase.
★★★★★
★★★★★
Jacinthe P - February 5, 2020
Verified Purchase
Easy repair
Part came fast; instructions for repair very clear as always
★★★★★
★★★★★
Robert W - May 20, 2019
Verified Purchase
Easy repair
The dishwasher part, inlet sump, arrived quickly and in perfect condition. Repair was made, dishwasher works like new.
★★★★★
★★★★★
Robert D - April 8, 2019
Verified Purchase
Fast shipping
Fast shipping part in good shape easy fix
★★★★★
★★★★★
Christopher Paul F - December 17, 2018
Verified Purchase
The part worked as expected and fixed the leak.
Yes my dishwasher is working once more, thanks. FYI I noticed that the existing part had virtually perished from use. Must have been attacked by the dishwasher chemicals used.
★★★★★
★★★★★
Nathalie P - November 20, 2018
Verified Purchase
Easy to install, and great to find it..
Received it fast, great, we did not have to change all the dishwasher, and now working great again !!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leak from the bottom center
The connector pump had a pinhole leak at the seam (new part did not have seams). Also replaced the sump inlet which looked worn and the impeller.
Lay dishwasher on it's back to access the bottom. Loosen all clamps. Remove both U shaped holders on the sump inlet. Remove screws holding the drain motor. Pull out the pump motor and sump inlet. Connector pump can be unscrewed from the bottom.
Replace parts and reassemble. It isn't that bad once you start disassembly, especially for anyone somewhat handy.
The cat brought in a rat which ate holes in the sump inlet.
First, I took off all the pipe clamps and retaining brackets. Then, I pried it out of there. One of the tabs holding one of the other bits to the body got busted, but it didn't matter, as it is held on very well just by the pipe clamp connection. I stuck the new one in and re-attached all the hoses. The GIANT complication was that a new floor had been installed over the old floor, right up against the kick plate- so in order to remove the dishwasher, I had to slice open the counter, as the new floor prevented sliding it out. To prevent the problem recurring, I spray painted over the sump inlet to make it taste worse. This is the downside of a cat door.
Other Parts Used:
Tom from Bethesda, MD
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
11 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak from under dishwasher. Leaky inlet sump
Disconnected the electricity, the drain hose, and the water supply from the dishwasher. Loosened the two screws from the countertop and pulled out the dishwasher. Turned it on to it's side. Saw the damaged inlet sump. Had to remove the Pump connector to get to the inlet sump. Checked it also and discovered that it was starting to develop a small crack from the inside. I decided to replace it as well. The job involves removing the hose clamps and removing the spray mechanizm from the interior of the dishwasher to spin out the inlet sump. Not a difficult job.
Removed the unit from under counter and placed it with the door side down. Removed clamps/bands from the outlets on the sump and removed screws that attached sump to dishwasher tub. Reversed the process with the new sump and positioned the dishwasher unt=der the cabinet. Next step was to remove the arm and cover parts to the sump, then removed the old upper neck portion that stuck to a strainer. Then aligned the strainer to connect to the small neck of the sump and replaced items in the order from which they were removed.
Other Parts Used:
Ron from HODGES, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking from sump
I had a slow leak from vicinity of sump. I replaced sump and pump connector as these were only likely sources of leak based on parts select history. Turns out plastic tub had a fine crack. The crack was directly under the heating element which had melted the plastic and over time created this small crack that was found by a repair guy immediately. I even suspected a tub leak and searched for one but being directly under the element made it invisible to me and in an area I did not suspect (front). Oh well - also learned GE charges $100. to come to my house, show me a crack, and leave (I repaired it with epoxy).
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
July 22, 2019
The rubber inlet sump on my dishwasher has a hole in it. Can i patch it like a bike tire? Is it easy for me to replace?
For model number EDW4060G00SS
Hello Ron, Thank you for the question. Unfortunately it would need to be replaced. Previous customers have said it was a easy repair. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
January 19, 2018
The middle and upper spray arms do not seem to rotate while washing. When I open the door there is water dripping from them but the items in the upper rack do not get cleaned. Is there a diverter valve or other device that controls these two arms getting water or could it be a blockage?
For model number PDW7880G00SS
Hello Steve,
Thanks for your question. This may be due to a clog with the sump filter, part number PS2370522. Have a look at it and see if it is damaged or clogged, and replace it if needed.
I hope this helps.
I need p/n PS259528, OEM # WD18X10008 Inlet Sump. I bought one from a local repair shop and it had the correct OEM # on the bag but the part is missing the inlet ( port ) that the turbidity sensor plugs into. I tried cutting and gluing but it didn't work. Can you advise stock and if this comes with port for the sensor. Thanks Peter Robinson
For model number GSD6209G00WW
Hi Peter, thank you for your question. According to our research, the part you are looking for is Clamp, part number PS258120. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure everything is fitted t...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259528
Manufacturer Part Number: WD18X10008