GE WD12X10304 - RACK SLIDE END CAP | PartSelect.ca
RACK SLIDE END CAP – Part Number: WD12X10304
RACK SLIDE END CAP – Part Number: WD12X10304 RACK SLIDE END CAP – Part Number: WD12X10304 https://partselectca.azureedge.net/Schematics/GE/00125643i03.gif

RACK SLIDE END CAP

2 Reviews

Your Price

CAD$5.23

PartSelect Number PS2370502
Manufacturer Part Number WD12X10304
Manufactured by GE

This part attaches to the rails of the upper dishrack, to prevent it from sliding all the way out.

This part works with the following brands: General Electric, Hotpoint, Kenmore.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Not cleaning dishes properly | Door latch failure | Door won’t close

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 73 reviews What's this?
1-5 of 73
411 of 430 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Customer:
Joseph from Haymarket, VA
Worn/broken plastic parts were causing misery
Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness with our dishwasher has increased 100%. BTW, thanks to the very helpful, friendly and knowledgeable staff at PartSelect.com -- next job, replace the ice maker in the freezer!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

227 of 428 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Customer:
michael from perry hall, MD
Wheel replacement
Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs

Help other customers find the most helpful instructions.

Were these instructions helpful?   

27 of 37 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
Dave from Littleton, CO
Parts were old and worn out
The repair was easy. A couple turns of a screwdriver was all that was necessary to remove the rollers and slide assembly. The I simple installed the new rollers. Slid the slide into place between the rollers and then added the back caps to the slide. Replaced the rack rollers on the top basket and then slid it into position between the new slides. Once in place, I attached the end caps to the front of the slide. Simple and quick.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

28 of 40 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Customer:
Warren from Stillwater, MN
Top and bottom rack were rusted thru
Bottom rack - slide the old one out, slide the new one in. The rack came came with the wheels, so I didn't use the replacement ones.
Top rack - remove the rail end caps - they will likely break so order new ones. Slide the rack out. Remove the rotating spray arm and then remove all the brackets. I was able to re-use the old brackets and didn't need the replacements. Install the old brackets on the new rack, install the spray arm, and slide the new rack back into the rails. The new top rack also came with wheels installed, so I didn't use the replacement ones. Once the rack is back in the rails, install new rail end caps. Put them in sideways and facing into the washer. Straighten the caps and turn them into place. Be careful with the rail caps - they break easy and are expensive. Make sure they hold the top rack in place, and that's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 33 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Customer:
Patrick from San Jose, CA
Upper and lower racks starting to rust
Removed the lower rack and upper rack after removing the end caps on the rail. Order new replacement end caps. The originals will likely break because the plastic becomes more brittle over time. Unsnap the upper washer arm from the original upper rack and snap onto the new one before inserting it into the rails.

The trick is replacing the end caps. Using needle-nose pliers, bend the indented edge of the rails out so you can attached the new end caps without trouble. After they are in place, use the tip of the needle-nose pliers to restore the indentation on the edge of the rails to lock the caps in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 73
Customer Reviews
Average Rating:
2 Reviews
3
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Sort by:

Model Cross Reference

Brand
Model Number
Description
General Electric
1200L02
Dishwasher - DISHWASHER
Kenmore
18385
Dishwasher - DISHWASHER
General Electric
3000B10
Dishwasher - DISHWASHER
General Electric
3000W10
Dishwasher - DISHWASHER
Kenmore
36.1402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
363.14471792
Dishwasher - Kenmore Dishwasher Model 363.14471792 (36314471792, 363 14471792) Parts
Kenmore
363.14475792
Dishwasher - Kenmore Dishwasher Model 363.14475792 (36314475792, 363 14475792) Parts
Kenmore
363.14478793
Dishwasher - Kenmore Dishwasher Model 363.14478793 (36314478793, 363 14478793) Parts
Kenmore
363.1516790
Dishwasher - Kenmore Dishwasher Model 363.1516790 (3631516790, 363 1516790) Parts
Kenmore
3631401190
Dishwasher
Kenmore
3631401191
Dishwasher
Kenmore
3631401590
Dishwasher
Kenmore
3631401591
Dishwasher
Kenmore
3631401592
Dishwasher
Kenmore
3631401890
Dishwasher
Kenmore
3631401891
Dishwasher
Kenmore
3631401892
Dishwasher
Kenmore
3631402190
Dishwasher
Kenmore
3631402191
Dishwasher
Kenmore
3631402192
Dishwasher
Kenmore
3631402590
Dishwasher
Kenmore
3631402591
Dishwasher
Kenmore
3631402592
Dishwasher
Kenmore
3631402890
Dishwasher
Kenmore
3631402891
Dishwasher
Kenmore
3631402892
Dishwasher
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher