This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore.
Part# WB24T10028 replaces these:
AP2024075, 769695
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 27, 2017
My GE oven large burner control is on high heat even when in another setting, does the (infinite switch control) control this temperature selection. It happens on the large burner only.... should I replace this part?
For model number JBP79AY4 and Serial: ST219609G
Hi David,
Thank you for your question. Generally yes, although I would suggest testing your switch and your element to be sure. You can test those parts with a multi meter. When testing you switch, make sure to put it in the on position. If you do not get any readings at all while testing it then the switch is bad. When testing your burner, it should read anywhere between 0 - 120 ohms of resistance. If it does not, the part will need to be replace. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit...
