Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Handle
1. Order part 2. Remove 2 top screws holding vent cover and carefully remove cover 3. Open door all the way and lift, door will come of the microwave 4. Set door on a flat surface facing down 5. You will need a flat screwdriver,carefully set the screwdriver between the door and the black plastic and pry out completely 6. Remove screws holding handle. (This will be a good time to clean the inside of this door) 7. Attach new handle tighten screws 8. Put black plastic back in door and press on all around make sure that is set in place 9. Re-install door and vent.
Other Parts Used:
Robert from WATERTOWN, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
April 13, 2023
The white painted metal trim around the glass front of our LFEF3017LWB range is rusted (don't know why?). Can I easily disassembled the door and replace the trim or is the door sealed together with adhesive or caulk? At the same time I also need to replace the white plastic Oven Door Cap which has yellowed. Thanks for your assistance.
For model number LFEF3017LWB
Hello Stephen, Thank you for writing. To replace the trim you will need to remove the End Cap and handle. To do so you will need to remove the top screws on the inside of the door at the top corners that hold the handle and end cap in place. We hope this helps!
Do you stock a range oven door trim kit for this model
For model number 790.94142310
Hello James, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS2364260. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This handle mounting screw works with your oven or range, and bolts the door handle to the door. It is approximately 2 inches in length and is an OEM part sourced directly from the manufacturer. If your oven door will no...