This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH12X10413 replaces these:
AP4412865
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
November 18, 2017
My washer's water level dial is broken - the water level stays the same no matter what level I set it at. The dial does not recognize the "reset" portion of the settings. I would like to fix this myself. What part do I need?
For model number WHRE5550K2WW
Hello Chris,
Thanks for your question. The water level pressure switch is a common cause for that issue. We would recommend replacing it.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
November 21, 2017
I wrote in this week about the water level stopping at a medium level, no more no less. It was suggested that i purchase a pressure switch. Will replacing that fix the problem of the water level dial and that i can't 'reset' the level? I added some clothes to a load of laundry and couldn't reset the machine to allow more water to flow into the tub. (i have not replaced the switch) thanks so much!
For model number WHRE5550K2WW
Hi Chris,
Thank you for your inquiry. To verify if the pressure switch will fix the issue you will need to check it with a multimeter. If the part is working correctly, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the water pressure switch hose, the drain pump and the lid switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Andy
July 30, 2018
My GE top loader washing machine isn't going on the final spin cycle. I opened the front cover, took the hose off the base of the machine on the far left, blew in it several times to trip the pressure switch but that didn't work in making it on the final spin cycle even with it turned to "spin cycle". I think i need a new switch. Is that possible? If so which is the correct switch. Thanks much Andy
For model number WHRE5550K2WW
Hi Andy, Thank you for your question. The pressure switch actually measures how much water is inside of your appliance as it is filling and is the part that tells the machine when to stop filling with water. It actually sounds like you may need to check your lid lock switch. That part is the part that would or would not allow your appliance to go into the spin cycling. If it believes that you lid is open, it will not let your appliance go into the spin cycle. The lid lock switch is a safety device to prevent the machine from going into the spin cycle while the lid is open. I would suggest testing that part to see if it is working correctly, you should be able to test that with a multi meter. I hope that helps. Good luck with your repair.
Not sure that my washer size load selector is functioning properly. It seems that it will not fill past a medium size load. I did buy this washing machine used, What's told it works.... And it does but it seems to me that the knob just freely spins around and doesn't necessarily select the correct size......
What part do I need to make Sure that my Load size capacity button Is working properly??
Is it the pressure Indicator switch. Or something else....?
For model number WJRE5550K2WW
Hi Carrie, thank you for reaching out. According to our research, you may need to check the following parts to fix the issue: selector knob, part number PS1482291, pressure switch, part number PS2354069, and water inlet valve, part number PS1155105. To verify if the pressure switch is faulty, you will need to check it with a multimeter. If the issue persists, then you may need to replace the control board, part number PS2364828. We hope this sorts out your problem!
This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, so the switch can con...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2354069
Manufacturer Part Number: WH12X10413
