Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Denis B - March 10, 2020
Verified Purchase
Easiest dishwasher repair
Part was received in record time and repair done in record time. The right part (drive belt) with the right tools (fingers) and 10 minutes is all it took to get the dishwasher up and running like new.
★★★★★
★★★★★
Rodney H - May 7, 2019
Verified Purchase
great belt...easy install
Slip it over the big gear...i mean right over onto top of gear...then wrap around small gear (motor) ...stretch abit and turn big gear, while pushing belt onto big gear...and with a little finger strength of Thor, slowly pull and push until the belt slips on completely.... grease with the silcon grease provided and VOILA! All done.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 26 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishes not being washed, water below heater element
I attempted to fix it about a year ago. Took apart the screen center stem and water spinner. I could not find anything wrong. The machine was used very infrequently over the years. Recently my wife approached me again to fix it and knowing I didn't find any thing the first time: I took the lower panel strip off and found the translucent belt broken. I found your site matched up a belt size and ordered it. Three days later it arrived, I installed it and everything seems to work. The water drains and I'm back in business. It was so easy I was embarrassed I did not fix it the first time.
Other Parts Used:
Theodore from Madison, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
25 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noticed a water growing water spot downstairs under the dishwasher .
I pulled the dishwasher out & watch it complete 1 cycle : water was leaking at a through hole used to secure the upper dish rack roller to the cabinet : the nut & seal holding the roller was loose allowing water to drip down the outside of the cabinet under the insulation.: water dripped onto the belt causing belt to slip : many water marks around the pump ; as a precaution i replaced the pump bottom seal & the pump to chassis gasket : I also checked the other 3 rolles ; replaced cracked top flange & installed a more flexable water supply hose .
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
19 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
belt broken, dirty water remaining in washer
I had already loosened the motor from inside the tub....so it was fairly easy to wrap the new belt around the motor/pulley system.... even though the old broken belt was 2 inches longer than the new belt(probably as a result of age and use, but the new belt is obviously the right size!) Once in place, I did have to take some care in screwing down the seal from inside being as it wanted to go more to one side than the other from the pressure of the tight belt, but all in all, it wasn't so bad. Unfortunately for me when I put the dishwasher on, I thought the dirty water problem would go away, but I soon learned that I also had a clog in the plumbing. I guess I'll never know if one thing caused the other or it was just 2 things going wrong at the same exact time. But everything is perfect now. Also, the part I ordered was at my doorstep in less than 36 hours!!!! That's fantastic!
Other Parts Used:
james from smithtown, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spray-arm motion, no drainage (broken belt)
Getting the new belt installed is a bit tricky; it seems too small to span the pump and drive pulleys.
Nevertheless, start with the belt positioned in the drive pulley and stretch it so one side fits into the slot of the pump pulley. Using both hands, crank the pulley over until the belt "rolls" into place. It may take several tries as the workspace tends to be rather tight. Good luck.
Other Parts Used:
Paul from Piedmont, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt slipping after 23 years of use
Removed bottom front panel with nutdriver,rolled old belt off rolled new belt on and applied belt grease that came with new belt.New belt came with instructions that were exactly right for belt installation. Thank You Danny Hammons
Other Parts Used:
Danny W. from Celina, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not drained
Remove bottom cover. Put the belt on the large pulley and stretch it about 5 times to make it larger. Remove the belt from the large pulley and put it on the small pulley at the motor. Stretch it to left side of the large pulley and make sure the belt is on partial of the pulley's groove then rotate the large pulley forward. The pulley will pull the belt into the groove by itself.
Other Parts Used:
Thanh from Matthews, AL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt broken, dishwasher didn't drain
Belt seemed too small at first to fit, but turning the power module pulley while holding the belt enabled it to slip in properly. Didn't help that there's not much space to work.
Other Parts Used:
Jason from Sunnyvale, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drive belt
First I was amazed that the belt was available for my ancient dishwasher. Then I was amazed again when it came overnight. The instructions said to stretch it over the two pulleys but my hands weren't strong enough. In a sudden flash of brilliance I decided to use a screwdriver as a lever to force it onto the second pulley. Done deal - happy home handyman.
Other Parts Used:
Michael from Bethany, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump drive belt broke
Removed two panels on front bottom to gain access to motor and pump pulley. Looped belt around motor pulley and partially looped belt on larger pump pulley then turned pump pulley together with the belt until belt was fully installed., then coated belt with silicone grease to lubricate it.. very simple procedure.
One note of precaution, UNPLUG power plug before working on appliance.
Other Parts Used:
HARRY from CERRITOS, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Drive Belt
No problem at all. Belt slipped on very easily. Followed directions in the package.
Other Parts Used:
Richard from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
April 25, 2018
We purchased clear belt 6-9021150 (order 7489976) and installed the new belt with grease on 5/12/15. The new belt and grease solved the problem fine. It has now begun to squeal when the washer starts to drain. Is it possible to get new silicone grease? Or, is it time to order a new belt kit that comes with the grease? (the belt still seems to be working.) (the belt has been installed for 3 years.) thank you kindly..
For model number WU502
Hi Donald,
Thank you for your question. Unfortunately it looks like the grease only comes with the belt. So it looks like you would have to replace the clear belt kit here. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ralph
August 19, 2019
Replace part #6-9021150
For model number WU482
Hello Ralph, thank you for contacting us. This Clear Belt manufacturer's part number 6-9021150 is the correct replacement for Maytag Dishwasher model number WU482. I hope this answers your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dana Or Doris
August 27, 2017
Dishwasher- It washed, drained then rinsed and would not drain. It acted like it got to the faucet to drain and it spit a little water out and that was it! Like it was stopped up at the white piece that hooks to the faucet.We ordered a fill/drain assembly, did we get the right part, do you think?
For model number WC202
Hi Dana,
Thank you for the great question. The problem sounds like the drain impeller, the drain impeller pushes water through the drain hose in order to drain. Unfortunately the impeller is no longer available but it will be a good idea to check the impeller before installing the hose you ordered.If there is damage to the impeller you will know the drain and fill hose are fine and you can return the uninstalled parts back for a refund if you wish.
Hope this helps!
Hi Richard, thank you for reaching out. The belt for your model is part number PS2347264. We hope this helps!
Was this helpful?
Thank you for voting!
THOMAS
August 8, 2018
Need a drive belt for motor
For model number WU502
Hello Thomas, thank you for your question. The belt for this model is part number PS2347264. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2347264
Manufacturer Part Number: 6-9021150
