DU451 Jenn-Air Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Clear Belt – Part Number: 6-9021150
$91.91
In Stock
Clear Belt
★★★★★
★★★★★
(3)
Part #6-9021150
The parts specs are: 25 3/8" long and 1/4" wide.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Door Spring Kit – Part Number: 901111
$46.15
Special Order
Hose Clamp – Part Number: WP285655
$15.68
In Stock
Hose Clamp
Part #WP285655
This hose clamp is sold individually.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Float Switch – Part Number: WP99002560
$62.56
Special Order
Float Switch
★★★★★
★★★★★
(2)
Part #WP99002560
Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Door Gasket - gray – Part Number: WP901403
$167.69
In Stock
Door Gasket - gray
★★★★★
★★★★★
(5)
Part #WP901403
This dishwasher door gasket is gray in color and is used for some belt driven dishwashers. This gasket is made of rubber and is eighty-nine and three quarter inches long.
O-Ring Seal – Part Number: WP910934
$9.85
In Stock
O-Ring Seal
Part #WP910934
This o-ring seal is well under an inch in diameter. It is all black in color and it is made entirely of rubber.
Door Spring Kit – Part Number: Y901862
No Longer Available
Door Spring Kit
Part #Y901862
Also included in this kit is a nylon insert.
Float Palnut – Part Number: WP911265
$9.85
Special Order
Float Palnut
Part #WP911265
This nut is sold individually.

Common Symptoms of the DU451

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace door seal
37 of 43 people found this instruction helpful.
  • Jeffrey from Wilmington, DE
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Remove old seal by pulling out tabs one at a time.

To install new seal, I had to remove the front control panel and door panel to access the back side of all of the slots that the new seal tabs go into. Using needlenose pliers i pulled each tab individually until they were locked into place.
Replace door and control pan el.
Was this helpful?
Thank you for voting!
Right Side Door Springs Broken
25 of 29 people found this instruction helpful.
  • Rock from Freeport, ME
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
With the dishwasher door open remove the 3 srews connecting the top of the dishwasher to the bottom of the kitchen counter top. Remove the lower access panel from the dishwasher and lower the dishwasher about 1/4 inch in the front and back of the dishwasher). Once you have lowered the dishwasher enough slide the dishwasher out about 6 inc hes (enough to gain access to the door springs on the left and right side). Remove all broken spring parts and replace using new springs. The left side of the door contained a single heavy duty spring and the right side of the door contained a heavy duty and light duty 'helper' spring. I replaced only the right side springs since the left side spring was in excellent condition. When the springs are installed slide the dishwasher back into its original position and raise the dishwasher back up to its original height using the front and back adjustment screws. Replace the 3 screws holding the top of the dishwasher secure to the bottom of the countertop. Ensure that the door opens, closes and latches smoothly and then replace the lower access panel. Job done.
Was this helpful?
Thank you for voting!
Dishes not being washed, water below heater element
25 of 31 people found this instruction helpful.
  • Theodore from Madison, CT
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I attempted to fix it about a year ago. Took apart the screen center stem and water spinner.
I could not find anything wrong. The machine was used very infrequently over the years. Recently my wife approached me again to fix it and knowing I didn't find any thing the first time: I took the lower panel strip off and found the translu cent belt broken. I found your site matched up a belt size and ordered it. Three days later it arrived, I installed it and everything seems to work. The water drains and I'm back in business. It was so easy I was embarrassed I did not fix it the first time.
Was this helpful?
Thank you for voting!