What it does. Why it matters. Everything you need to know for an easy fix.
Terminal Block Kit Specifications
This range terminal block kit provides a secure connection point between the household power cord and the appliance’s internal wiring. It helps distribute electrical power safely and reliably to the range’s heating and control components. A damaged or worn terminal block can prevent the oven or burners from operating correctly, cause buzzing noises, or lead to power interruptions, and replacing it can help restore proper electrical function and safe operation.
Part #5303935271
Manufactured by
Frigidaire
for Frigidaire, Kenmore, Crosley, Electrolux
OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
About this fix
Common problems and models this part fixes.
Easy
15 - 30 mins
Rated by verified customers
What this part fixes:
Will Not Start
Works with the following products:
Range
Wall Oven
Part# 5303935271 replaces these:
AP4353768, 75303935271
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Easy
15 - 30 mins
Average repair rating from 1 real customer like you
Sort by:
Prev
1
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
left terminal broke off from the base of the block causing circuit breaker to trip and not able to be re-set
0 of 7 peoplefound this instruction helpful.
Fred from North Babylon, NY
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
Ensured breaker was off. My range is hot wired. Removed all cables from old terminal block with nutdriver. Used phillips head screw driver to remove old terminal block from back of range. replaced old terminal block with new one. Re-attached accessory cables to small terminals first, then the main cables to the terminal block using where
... Read morenecessary long nose pliers. It is important to make note of which cables are attached to each terminal of the block, so make a sketch PRIOR to removal. Also be careful how the cables are attached to the block. You are using 10 gauge cable with thick insulation. It is important that when pushing the range back into position the cable does not put too much pressure on the block as it will break it. That's exactly what happened to this last one. It probably cracked under the strain of the pressure of the cable and finally current running through it weakened it to the point where it broke off from the block causing it to short and trip the breaker.
Read less
Was this helpful?
Thank you for voting!
Prev
1
Next
DIY Questions and Expert Answers
4 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James - For model number 790.93019310
November 21, 2019
Our oven has stopped heating. When its turned on you can hear the relay clicking from time to time. I have replaced the heating prob and both elements. Still nothing. Can you help?
Hello James,
Thank you for your question. Our sources suggest that the electronic control board for your model under part PS1528269 needs to be replaced. Hope this helps!
Brad - For model number Frigidaire Model FFEF3003NWC
September 23, 2019
The oven will wihtout notice increase temperature to very high then have to turn down to extremely low to get @ 350 degrees. Same thing happening with burners. Will suddenly go high nad have to turn knob way down to get medium temperature. Never right away, happens after cooking or baking for a little while. Is there a control board or something that i can change?
Hello Brad thank you for writing .
Solution: The burner temperature control knob on the stove is defective and needs to be replaced. On certain models an entire control board may need to be replaced, which sounds like it is the case on your unit .we also suggest to call the manufacturer and see if there are any known issues, defects or recalls. Hope this helps. Contact us anytime.
Was this helpful?
Thank you for voting!
Cathy - For model number Tef351ewe
September 12, 2017
I was cooking on my Tappan stove and was also baking without any warning the stove burners (all) stopped heating and the oven also quit. We checked the breaker no luck getting it to work.I am hoping that you can give me some insight to my problem.
Hi Cathy,
Thank you for the question. There might be an issue within the wiring of the appliance. If there is no power going to the appliance I would check the terminal block first to see if there is any visible damage or burn marks. It could also be the outlet the stove is plugged into. There is no one part that would control all of the elements on the cooktop and the oven unless the stove is not getting power. If you have an multi meter you will be able to test for continuity in the power cord and the terminal block.
Hope this helps
Was this helpful?
Thank you for voting!
Robert - For model number LGEF3046TFH
June 12, 2025
Oven takes almost 45 minutes to heat to 350*....checked lower element for continuity ( good), replaced temperature sensor with new one. Still 45 minutes. Anything else I can do myself to troubleshoot this?
Hi Robert, thank you for reaching out. As you have already checked the element, and replaced the temperature sensor, the issue could be with the control board, part number PS12364539. It monitors the oven temperature and controls the oven heating functions in the range. You may need to replace it to fix the issue. We hope this solves your problem!
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wire Plug or Connector","title":"Wire Plug or Connector","url":"/Range-Wire-Plugs-and-Connectors.htm"},{"position":2,"name":"5303935271","title":"5303935271","url":""}]
My Orders
