Frigidaire/Frigidaire_Thumb/6KMIT12A.gif
See part 4 in the diagram
Replacing your Frigidaire Dryer Selector Knob play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Selector Knob

★★★★★
★★★★★
11 Reviews
$20.89   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2330885
Manufacturer Part Number 134844410
Manufactured by Frigidaire
Product Description

Selector Knob Specifications

This knob can be used with a washer or dryer and fits on a D-shaped shaft. It is sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Timer will not advance | Touchpad does not respond
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Frigidaire, Westinghouse, Electrolux.
Part# 134844410 replaces these:
AP4339026, 1460965, 134844410, 134034900, 134034910
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    I Need The Virginia
    January 18, 2018
    In the video you are replacing the middle knob. Are the 3 knobs all the same? I need the one that starts the dryer- the one on the right.
    For model number GLER341ASI
    Hello Virginia, Thank you for your inquiry. All 3 knobs are the same for this model. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Katie
    December 5, 2018
    Our knob broke off, and the spot it was at is now flat with the dryer, and we are unable to turn it on. Would a new knob replacement be what we need?
    For model number Ferb5700ds0
    Hello Katie, Thank you for the question. You will need to replace the switch that the knob fits onto. Please feel free to submit a new question with what the knob controlled or what switch was broken and we will be happy to help you with the correct part number. Looking forward to hearing from you!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Tim
    October 6, 2017
    Dryer runs but no heat.Replaced the element still no heat but noticed the selection knob was not advancing. Could this be my problem?
    For model number LER7648KQ
    Hi Tim, Thank you for your question .Yes, it could be. However I would suggest checking your thermal fuse, all of your thermostats, and your door switch as well first. In that order. Those are usually the parts that cause this sort of problem. I hope that helps. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Gene
    October 8, 2017
    Is this a set of knobs or just an individual knob?
    For model number GLGR642AS5
    Hi Gene, Thank you for your question. This would be just for one knob. They are sold individually. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kathy
    January 7, 2018
    Is the selector knob the same as the on knob?
    For model number GLER331AS2
    Hi Kathy, Thank you for the question. The Selector Knob, Part Number: PS2330885 are the two smaller knobs tot he left of the panel. The Timer Knob, Part Number: PS2330897 is the main knob on the right. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Penny
    February 10, 2020
    My washing machine pull start is broken. Can it be replaced
    For model number 127R65E66802816812
    Hi Penny, Thank you for your question. Before we can assist you further, we would need the model number from your washer. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. We hope this helps. Thank you and have a great day.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Michael
    February 27, 2020
    The knob on my dryer that turns to start snapped off and left a bit of plastic sticking out but not a full bit, what should i do
    Hi Michael, thank you for your question. You would have to replace the broken parts. If the shaft that the knob sits on is broken, you will have to replace the switch. If you see physical damage to your knob you will have to replace that as well. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Mary Ann
    July 20, 2021
    The knob to start the dryer broke off. I need to replace the knob. Inside the knob, there are 2 numbers: Kip6uo6 and 1340349. Can you please tell me what part I need to order? My dryer model number is gler642as3
    For model number GLER642AS3
    Hello Mary Ann, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2330897. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Jessie
    August 19, 2021
    My washer and dryer set is a very old model, i’m not sure if this selection knob fit it. Please help check, thank you.
    For model number 131495400
    Hi Jessie, Thank you for your question. To verify the correct knob for your washer, we would need the model number from it. If you could resubmit your question with this information, we would be happy to help you with this. Here is a link where you may find the model number on your washer, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. If you have any questions, please let us know.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Frigidaire Dryer Selector Knob

      Replacing your Frigidaire Dryer Selector Knob play video
      Customer Repair Stories
       Average Repair Rating: 4.8 / 5.0, 56 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Dryer squealed like a pig and at times the drum stopped rotating
      First thought the problem was a stretched drum belt or bad idler pulley. Ordered a new belt and idler assy plus spring. Replaced those items with relative ease following suggestions obtained at this site.However, problem persisted and I now suspected a bad drum bearing. Odered the bearing kit and replaced same using the following procedure.
      1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
      2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
      3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
      4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
      5. disconnected the wiring plug on the top right hand side at the top of the dryer.
      6. lifted the front panel slightly removing it from the main body and placed it to the side.
      7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
      8. Pulled the drum through the front of the dryer body and moved it to an open work area.
      9. Reached into the Dryer and loosened the two
      bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
      them aside to be discarded later.
      10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
      11. I had my wife hold the bearing in place while I started the three retaining screws.
      12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
      I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
      The dryer works like new now, doesn't squeal.
      Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on.
      • charles from new holland, OH
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        134844410, 5303281153
      674 of 691 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Knob replacement
      Just slipped them on and ready to go. Ordered them on thur and got em on Tues.
      • Kevin from Donalsonville, GA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134886700, 134844410
      380 of 387 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      dryer start switch shaft was broken by using pliers after knob was lost
      I first disconnected the power by unplugging power cord.

      I then removed back cover from control panel using philips screwdriver.

      I removed the start switch by twisting it counter clockwise.

      I removed the two push on connectors from the start switch.

      I installed the two connectors on the new switch.

      I twisted the new switch into place, and installed the new knob.

      I reinstalled the back cover plate.

      I inserted the power cord back into the receptacle.

      I twisted the start knob clockwise.

      VOILA!!!!!
      • ERNEST from SPRINGFIELD, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        134844410, 134398300
      202 of 281 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Knobs & Handle Broken
      Did repairs by hand, took longer to open box and remove packaging that to install the parts. Total time from mail box to repair complete- 3 Minutes.
      • Kevin from Cedar Rapids, IA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134844410, 131644700
      80 of 144 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The most-used control knob on the face of the dryer wore out.
      After entering the info on the dryer into the PartSelect site, it brought up a list of parts, and a diagram showing where all parts go on the dryer.
      Clicking on the knob description brought up a photo which proved beyond a shadow of doubt that this was the correct part. At a cost of $5, who wouldn't pay for the expedited freight also? For 6 months we've kept the pliars on top of the dryer to use in place of the worn out knob. Don't lose the address to this site. Jim
      • Jim from San Diego, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134844410
      77 of 138 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Fixed broken knobs and switch
      First, I unplugged the dryer. Then, I removed the back panel from the controls section (6 screws), disconnected the old switch and reconnected the new switch. Positioning the switch in the control panel took some figuring out, but once I realized that the switch slots into place, and then gets locked in by turning 1/8 of a turn, it worked fine.

      Replacing the knobs was a cinch, just popped them in place. Now the controls are like new again.

      Frigidaire controls are really junk, though. I won't be surprised if I have to do this repair again in two years.
      • Scott from Dorchester, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        134844410, 134398300, 134886700
      76 of 139 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Stripped knob
      Once the part was located all I needed to do was pop the old part off and pop the new part on. It took less than a minute from start to finish. It also saved me an $80 service call.
      • Celeste from Forney, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134844410
      75 of 137 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      broken knob
      Just put the new one on! Absolutely great service!!!!
      A+++++++++++++++++++++++++++++++++++++
      • Andrew from Cambridge, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134844410
      38 of 1227 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      On / off switch broke
      1st. unplug dryer
      2nd. remove housing / 4 allen head screws
      3rd. remove wiring clips from switch
      4th. remove switch / install new
      5th. install wiring clips
      6th. test dryer
      7th put housing back on
      • Bill from Mentor, OH
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        134844410, 134398300
      21 of 592 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I had 3 knobs break on my washer and had been using pliers to turn them. This is not the first time I've had broken knobs either. I think I must either be a Hercules or they are poorly made!
      I opened the pkg. and pushed them on!
      • Mary from Georgetown, KY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        134844410, 134886700
      20 of 591 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      11 Reviews
      4.2
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        2
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS2330885
      Manufacturer Part Number: 134844410
      Brand
      Model Number
      Description
      Frigidaire
      CFRE5711KW0
      Dryer
      Frigidaire
      CFRE5714KW0
      Dryer
      Frigidaire
      CRER442AS0
      Dryer - Residential
      Frigidaire
      CRER442AS1
      Dryer - Residential
      Frigidaire
      CRER442AS2
      Dryer - Residential
      Frigidaire
      CRER5700AS0
      Dryer - Residential
      Frigidaire
      CRER5700AS1
      Dryer - Residential
      Frigidaire
      CRER7900AS0
      Dryer - Residential
      Frigidaire
      CRER7900AS1
      Dryer - Residential
      Frigidaire
      CRGR442AS0
      Dryer - Residential
      Frigidaire
      CRGR442AS1
      Dryer - Residential
      Frigidaire
      CRGR442AS2
      Dryer - Residential
      Frigidaire
      CRGR5700AS0
      Dryer - Residential
      Frigidaire
      CRGR5700AS1
      Dryer - Residential
      Frigidaire
      CRGR5700AS2
      Dryer - Residential
      Frigidaire
      CRGR5700AS3
      Dryer - Residential
      Frigidaire
      CRGR7900AS0
      Dryer - Residential
      Frigidaire
      CRGR7900AS1
      Dryer - Residential
      Frigidaire
      CRGR7900AS2
      Dryer - Residential
      Frigidaire
      CRGR7900AS3
      Dryer - Residential
      Frigidaire
      CRTR9300AS0
      Washer - Residential
      Frigidaire
      CRWS1879AS0
      Washer - Residential
      Frigidaire
      CRWS1879AS2
      Washer - Residential
      Frigidaire
      CRWS5700AS0
      Washer - Residential
      Frigidaire
      CRWS7900AS0
      Washer - Residential
      Frigidaire
      CRWS7900AS1
      Washer - Residential
      Electrolux
      EKDR14XAKW0
      Dryer
      Electrolux
      ELTW20XAKW0
      Washer - Residential
      Frigidaire
      FER331AS0
      Dryer - Residential
      Frigidaire
      FER331AS1
      Dryer - Residential

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service