![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Oven Light Housing
Fits your C2S950P4M1W2!
$75.73
Special Order
Fits your C2S950P4M1W2!
PartSelect Number
PS230438
Manufacturer Part Number
WB08T10002
Manufactured by
GE
Product Description
Oven Light Housing Specifications
Must buy bulb locally as per manufacturer.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
General Electric, Kenmore, Hotpoint, Haier.
Part# WB08T10002 replaces these:
AP2019709, 769452, WB02T10115, WB02T10116, WB2T10115, WB2T10116, WB8T10002
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 7 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Other Parts Used:
-
Jack from Okmulgee, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
23 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven light did not work
Turned off power to the oven, Removed the oven light housing, installed new housing, turned power on and walla.
Other Parts Used:
-
Howard from Rio Vista, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire connection to socket was bad
Disconnected the old socket ( 2 srews ) removed the two wires from the old socket, reconnected them to the new socket and reinstalled the lamp.
Other Parts Used:
-
David from Gansevoort, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Light Assembly damaged
I have a double oven and coincidently I had to replace the two Oven Light Assemblies.
I am really glad about your web site because once I got the number from my oven model you guys were the first ones that came up. Thanks to your prompt and reliable service my oven is back to its original state.
Jose Figueroa
I am really glad about your web site because once I got the number from my oven model you guys were the first ones that came up. Thanks to your prompt and reliable service my oven is back to its original state.
Jose Figueroa
Other Parts Used:
-
Jose from Frederick, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light not working tried to Remove light assembly not knowing glass could screw out. Without thinking grounded exposed hot wire to burner bracket melting light socket connector. Had to replace socket.
First and most important trun off curcit breaker. Use 1/4 inch but driver to remove socket (2) screws. Remove ground and hot wire clips from old socket, replace on new socket. Screw back into oven ceiling and turn on power. Reset clock and your are done. Very simple.
Other Parts Used:
-
Richard from CUMMING, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven light housing broken and lower element needed replacing.
Had to replace one female connector on light installation. Found one at auto supply store and used crippling tool to install. Two screws used for easy installation. Lower element involved connecting two wires with male/female connectors and adding two screws. Works great.
Other Parts Used:
-
Larry from GREENWOOD, SC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shortage in wiring cause the housing to burn out
Replaced new light housing.
Thanks to you guys for the prompt response
Thanks to you guys for the prompt response
Other Parts Used:
-
fred from PALM COAST, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Howard
March 17, 2018
Need to replace the light holder module for my top oven. As i thought you had to remove the module to change bulb and as i did the wire broke off the connector. Does the replacement module come with the wires too or is that separate and if separate what is the part number? Thank you
For model number JTP20WF3WW
Hello Howard, Thank you for your inquiry. The wiring harness that connects to the metal prongs at the bottom of the module comes separately-part# WB18T10271. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Beverly
October 17, 2019
What bulb fits this oven?
For model number PT916DR1BB
Hello Beverly, thank you for inquiring. The compatible Light Bulb for your model oven is part number PS217532. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
November 6, 2017
The bulb in our range burnt out. Each time we replace it the bulb works for a short time and then doesn't work anymore. Could this part need to be replaced?
Hi John,
Thank you for your question. It is possible that the oven light housing may need replacing. I would use a multimeter to check the continuity of both the housing and the wiring connected to it to see which part is causing the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bev
July 28, 2021
Oven light stopped working. Stove installed November 2020 and oven probably used a dozen times since. What bulb fits this stove? I see website says buy at store, but does not provide any other information. All I know is 40 watt. Also, I went to unscrew the bulb, the glass bulb came off in my hand, and metal base left in socket! Thank you in advance for your assistance. Bev
For model number PGS930SEL4SS
Hello Bev, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS230438. The bulb is only sold as part of the Socket and Glass Lens Assembly. The base is held in by screws. Once the screws are removed you can pull the base out and expose where the wires connect to the base. Pull the wires off the terminals and plug them onto the new base and reattach with the screws. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 23, 2023
I would like to know the part # for the lamps for our ovens at my church.
For model number JGB850SEF
Hello Dave, thank you for your inquiry. The oven lamp assembly you are looking for is part number PS230438. It comes in the lower oven section and upper oven section. The part number for both the lamps is the same. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
July 30, 2018
Would they burn out in one years time
For model number JGS750DEF688
Hi Richard,
Thank you for your question. That depends on a number of factors, such as: how much you use the oven light, or the manufacture of the part itself. Sometimes there is no reason for it just that the part has a short life. I believe that usually these parts are intended to last longer than that but I do not believe that the manufacturer, in this case GE, guarantees that unfortunately. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
November 19, 2018
What type of light bulb do i need to replace the light?
For model number JT1000SF3SS
Hello Kevin, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS230438. The bulb on its own is no longer made and sold on its own sorry. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Suzanne
July 1, 2019
What kind of lightbulb do i need ? Would a general hardware store carry it?Thanks,
suzanne
For model number JGSP28SEK4SS
Hi Suzanne, thank you for your question. I have listed the bulb for your appliance below. You will have to check with your hardware stores to see if they carry something like it. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Beverly
September 4, 2019
I do not need the complete housing for my oven lights. Just the bulbs
Hello Beverly, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Jerry
November 13, 2019
What is the part number for the oven light bulb for this model?
For model number JGS760EEL1ES
Hello Jerry, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS230438. The housing includes the Bulb. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS230438
Manufacturer Part Number: WB08T10002
Manufacturer Part Number: WB08T10002
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)