Fuse Kit R9900489

Official part for Speed Queen, Amana, Whirlpool

Easy 

30 - 60 mins 

2174577-1-M-Whirlpool-R9900489-Fuse Kit
Part Location Diagram of R9900489 Whirlpool Fuse Kit
See part 6 in the diagram
( Grid squares measure 1x1 inch )
2174577-1-S-Whirlpool-R9900489-Fuse Kit 2174577-2-S-Whirlpool-R9900489-Fuse Kit 2174577-3-S-Whirlpool-R9900489-Fuse Kit Part Location Diagram of R9900489 Whirlpool Fuse Kit
Proudly Canadian
OEM badge Official OEM Part
$113.57
In Stock
Order within the next 4 hrs and your part ships today!
 Fits your AE5413!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Fuse Kit Specifications

This fuse kit comes with a thermal fuse, a high limit thermostat, two lead wires, & four mounting screws.
Part #R9900489
Manufactured by Whirlpool for Speed Queen, Amana, Whirlpool

You May Also Need

Because heroes deserve fewer surprise re-installs.

$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

Rated by verified customers

Works with the following products:
  • Dryer
Part# R9900489 replaces these:
AP4307250, 768847, 490P3, 61208, R0611010, R0611016, R9900489

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 7 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
dryer would not heat
22 of 25 people found this instruction helpful.
  • valerie from gainesville, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
i removed the front panel of the dryer, two screws on the bottom. then removed the 2 screws on the heating element that was located in the back of the dryer. pulled out the heating element and tested the parts with my husband's electrical equipment. the fuse and thermostat were bad. replaced those two parts on the heating element, connected all the wires back and screwed it back in the dryer. it works like a brand new dryer.
Read less
Was this helpful?
Thank you for voting!
Dryer runs but doesn't heat
11 of 16 people found this instruction helpful.
  • Darrell from Edwardsville, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
No heat usually means a bad heating coil. Removed the heating coil and found a burnt element. Searched the internet looking for best price and fastest delivery. Ordered heating element and fuse kit from PartSelect on Tuesday, received parts on Thursday. Installation was quick and easy. Saved at least $100 using PartSelect!
Was this helpful?
Thank you for voting!
No Heat
10 of 15 people found this instruction helpful.
  • Richard from Grayslake, IL
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
I purchased the "m" series ignition coil kit per" ask how repair man". Installation was straight forward. Simple repair when correct parts are used.
Was this helpful?
Thank you for voting!
dryer plug was burnt, wouldnt run
4 of 5 people found this instruction helpful.
  • jane from ashland, NE
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
replaced plug, still dead,read fixit book, mislead me , found online info, tested motor, thermal fuses,found bad one , partselect suggested a bad high limit also, bought kit, here in two days, works fine ,thanks
Was this helpful?
Thank you for voting!
Dryer wouldn't heat
3 of 6 people found this instruction helpful.
  • erica from Clemson, SC
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
I should have know it was the fuse from the beginning but I figured this out after replacing the the heating coil. (I didn't have the tools to test the wiring, and everyone kept telling me it was the heating coil.)

Anywho, I replaced the thermostat first then the fuse. They were located on the outside cabinet of the heating coil. I plugged it up and then there was heat. They did look a little different from the original ones but you could tell which was which. The fuse is at the top and the thermostat at the bottom. I didint have to use the new wiring to the fuse because they looked fine. I did however had to use the wiring that came with the kit for the thermostat because the old one was fried and a little different from the original.

Well that's my story. Sorry if there's any lackness in the details.
Read less
Was this helpful?
Thank you for voting!
dryer wouldn't heat
2 of 4 people found this instruction helpful.
  • Berkeley from Staunton, VA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I tested all the thermostats and fuses and the heating element with a VOM. I found that the thermal fuse was bad and replaced that and it heats fine. The hard part was reaching everything from the front of the dryer. Poor design for access. Also replaced the door switch while I had it apart.
Was this helpful?
Thank you for voting!
the dryer wouldn't get hot
1 of 2 people found this instruction helpful.
  • JOANN from PLEASANT VALLEY, NY
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed a couple of screws and replaced the new fuse . the dryer is heating up ok now.

p.s thank you for the quick deliever on the part, . as i was only with out the dryer for two days

Thanks
JoAnn
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #R9900489
Brand
Model Number
Description
Amana
7493-LEM437
Dryer - DRYER
Speed Queen
AE3213
Dryer - Residential
Speed Queen
AE3413
Dryer - Residential, Electric
Speed Queen
AE4113
Dryer - Residential
Speed Queen
AE4213
Dryer - Residential
Speed Queen
AE4413
Dryer - Residential, Electric
Speed Queen
AE5113
Dryer - Residential
Speed Queen
AE5213
Dryer - Residential
Speed Queen
AE5413
Dryer - Residential, Electric
Speed Queen
AE7133
Dryer - Residential
Speed Queen
AE7233
Dryer - Residential
Speed Queen
AE9133
Dryer - Residential
Speed Queen
AE9233
Dryer - Residential
Speed Queen
AE9433
Dryer - Residential, Electric
Speed Queen
AEE933
Dryer - Residential, Electric
Speed Queen
AEE953
Dryer - Residential, Electric
Speed Queen
AEM333
Dryer - Residential, Electric
Speed Queen
AEM353
Dryer - Residential, Electric
Speed Queen
AEM433
Dryer - Residential, Electric
Speed Queen
AEM453
Dryer - Residential, Electric
Speed Queen
AEM633
Dryer - Residential, Electric
Speed Queen
AEM653
Dryer - Residential, Electric
Amana
CE2402
Dryer
Amana
CE3402L
Dryer - Electric
Amana
CE3402W
Dryer - Electric
Amana
CE9002
Dryer - Electric
Speed Queen
EE2107
Dryer - Speed Queen Dryer Model EE2107 Parts
Speed Queen
EG1120
Dryer - Speed Queen Dryer Model EG1120 Parts
Speed Queen
KE5313
Dryer - Residential
Speed Queen
KE5513
Dryer - Residential
Fuse Kit
$113.57
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.