What it does. Why it matters. Everything you need to know for an easy fix.
Water Inlet Valve Specifications
This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.
Part #205613
Manufactured by
Whirlpool
for Maytag, Amana, Kenmore, Speed Queen
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
16 Reviews
4.9
Out of 5
5 Stars
15
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Diane C - March 20, 2020
Verified Purchase
Great part, fast service!
My 1982 washer is back in working order!
★★★★★
★★★★★
Sigrid R - February 13, 2019
Verified Purchase
I'm a 69 year old grandmother and fixed my own washing machine myself. Perfect part.
Very fast shipping - easy to install
★★★★★
★★★★★
EDWARD S M - December 13, 2018
Verified Purchase
Worked perfect
Water Inlet Valve by GE, easy to install, video on how to install was excellent.
★★★★★
★★★★★
Jeff H - November 15, 2023
Verified Purchase
Part was very easy to install
The new valve arrived promptly in perfect condition
★★★★★
★★★★★
Perry H - October 22, 2021
Verified Purchase
Ditto
Ditto
★★★★★
★★★★★
Bruce B - October 29, 2020
Verified Purchase
Awesome Website
The part was easy to find once I submitted the make and model number for my 30 year old Maytag washer. The part arrived within a couple of days and was the exact match to the one removed. Washer working perfectly once again - Thanks Bruce
★★★★★
★★★★★
Randall T - February 22, 2019
Verified Purchase
Very quick and easy to complete
Part arrived quickly and in good condition. The part was for an older washer and had been updated with a new design replacement . I was made aware of the issue, and installation was still easy.
★★★★★
★★★★★
John S - June 29, 2023
Verified Purchase
good part
fast delivery
★★★★★
★★★★★
NANCY P - March 28, 2024
Verified Purchase
Easy repair, great part
We were happy to see detailed diagrams for our 40 year old Maytag washing machine on this website. It was good to know the part was verified to fit our model. The part arrived quickly and in good condition. The repair went smoothly and the machine has been working well with no leaks for the last few weeks.
★★★★★
★★★★★
Sharon R - June 19, 2020
Verified Purchase
Fast delivery, part exactly what we needed.
We were delighted that we could get a part for our old Maytag washer. We live in a small town, and it is difficult to get anything. The part was delivered very quickly, and we were able to get our washer up and running. We also appreciated the video that explained how to replace the part.
Prev
1
2
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Really Easy
15 - 30 mins
Average repair rating from 87 real customers like you
Sort by:
Prev
1
2
3
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Cold water valve only opened to a trickle
600 of 619 peoplefound this instruction helpful.
Brian from El Cajon, CA
Really Easy
Less than 15 mins
Nutdriver, Wrench (Adjustable)
I started by unplugging the appliance and then shut off the hot and cold water faucets then I disconnected and drained the hoses. Next, I removed the two screws that held the valve assembly in place. I then pulled the assembly out about 3 inches and disconnected the two wire plugs. The last step was to loosen the hose clamp on the outl
... Read moreet hose and pull off the outlet hose. I reversed the steps to install the new assembly and the total repair took about 10 minutes.
Followed your directions and it went very easy. Only took maybe 30 mins. I was impressed with your trouble shooting and inst!!!!
Thanks
wayne
Was this helpful?
Thank you for voting!
Cold water solinoid not opening properly
44 of 50 peoplefound this instruction helpful.
Erich from EastHampton, CT
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
I moved wash machine away from wall and unplugged from wall outlet. Shut off water, then removed hot and cold water lines from water inlet valve,removed screw from mounting plate and removed valve from wash machine. Checked to see if replacement valve was compatible (exact fit). Unscrewed the two screws holding valve to mounting plat
... Read moree,unscrewed hose clamp and removed water line at top of valve (outlet). Removed the four wires from solinoids.Replaced the four wires onto the new valve as they were on the old valve,reattached water line onto the top of valve and tightened.Reattached valve to mount plate with the two screws and mounted back onto machine. Hooked up hot and cold water lines back onto valve and snugged with pliers. Turned on water checked for leaks (no leaks), and did a load of laundry. Super simple,well worth doing yourself.
Read less
Was this helpful?
Thank you for voting!
Cold water would not flow into the washer
30 of 35 peoplefound this instruction helpful.
john from friendswood, TX
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
After verifying that the supply wasn't the problem, I ordered the replacement inlet valve module.
1) shut off water to machine 2) removed the hose connections from the valve 3) unplugged the washer 4) removed the plate holding the module - 1 screw 5) removed the hose clamp from the valve module to the washer
... Read more inlet 6) removed the two screws holding the valve module to the plate 7) removed the 2 wire connections to each of the two solenoids. 8) Reversed all of the steps above for the new valve module. 9) checked for leaks
Read less
Was this helpful?
Thank you for voting!
cold water barely flows, hot is ok
26 of 27 peoplefound this instruction helpful.
James from Bedford, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers
These Maytag people know how to build stuff. I was impressed with this valve. Built really smart. After a gazillion years (about 16 or so) the valve started making a funny groaning noise and the cold water flow was very slow. Took about 15-20 minutes to fill the tub.
the inlet valve is located on the back of the washer whe
... Read morere the hoses are connected. In fact the hose connectors are part of the valve.
To replace this valve, start by unplugging and turning off the water spigots, unscrew the two hoses from the valve. (you need a towel here, but that'll be obvious soon enough.)
Unscrew the single screw at the top of the valve bracket (the bottom of the bracket is held in place without screws.) Remove the screw holding on the sheet metal and pull the bracket out as far as you can without stretching things. Write down what colors of wire are connected, then pull off the electrical connectors.
The valve outlet is a skinny (compared to the inlet hoses) rubber hose that has a clamp to hold it in place. The clamp needs to be loosened with a 3/16" nutdriver a plier would probably work, but may be hard to get in there. Now slide the clamp further up on the hose, dislodge the rubber hose off of the old valve. Now it's free.
Reverse the steps. Believe it or not, that is all. It works great and this washer probably has another 10 year left in it.
Read less
Was this helpful?
Thank you for voting!
No hot water
16 of 17 peoplefound this instruction helpful.
Joel from New Canaan, CT
Really Easy
15 - 30 mins
Pliers, Socket set
Went on the PartSelect website, input the problem, and got the Water Inlet Valve as the diagnosis. When the part arrived, I viewed the short video on replacing the Water Inlet Valve and just followed the instructions. It could not have been easier. After turning off both the hot and cold water and pulling the plug from the wall socket,
... Read moreI removed the screw holding the bracket and valve to the machine; removed the 2 screws holding the valve to the bracket; removed the wire harness ends from each solenoid on the valve; replaced the valve with the new one and reattached the wire harness, followed by reattaching the bracket to the valve, and assembling to the machine.
Read less
Was this helpful?
Thank you for voting!
Water inlet valve failed
14 of 16 peoplefound this instruction helpful.
Lawrence from Eau Claire, WI
Easy
15 - 30 mins
Nutdriver, Screw drivers
Disconnect the water lines. Remove two screws that hold the water valve to the back of the machine. Pull the water valve out and remove the panel that holds it on to the machine. Remove the water line from the valve to the wash tub. Remove the four wires from the valve remembering where each one goes on the new unit. Attach the valve to
... Read moretub hose to the new unit. Attach the four wires in the proper order to the new unit . Screw the metal holding panel on to the valve. Push the unit in place and reattach with the two screws. Attach the water lines and use the machine. Remember to unplug the machine prior to changing the valve
Read less
Was this helpful?
Thank you for voting!
The fill cycles would start then stop suddenly
14 of 24 peoplefound this instruction helpful.
Peter from Aurora, IL
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
This was an easy repair. 1st I removed both water hoses 2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve. 3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose. 4th I removed 2 hex head screws that held the water valve to
... Read more the backing plate. -----------that was a whole 5 - 10 minutes!------------ Next I reversed the process 4th I attached the inlet valve with the 2 hex head screws 5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp. 6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw. 7th re-attached the hot & cold lines................................DONE 15 minutes tops
Of couse, turn off water to machine. Remove hoses. Then had to open unit - easiest by popping spring in with flat blade in seam under lid. Screws holding valve are on back of unit at hose inlet, so simply unscrew to remove failed valve. Clamp holding hose onto valve is crimped with pliers to remove. I suggest spending the 50 cents a hardw
... Read moreare store for new clamp, as my reattachment of existing clamp onto new value leaked. There are four electrical connectors, so remember order in which you removed them and return to same on new unit. Reassemble in reverse (hoses, water on) and your all set. Pretty easy: I figure it would be about $200 for service guy and part. My cost: $30 and 30 minutes
Read less
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
DIY Questions and Expert Answers
18 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lucy - For model number A712
April 17, 2018
My washer fills slowly with cold water when it is not on. If I put my finger under the rim inside the tub, it is wet. I've got the problem under control by turning off the cold water at source when not in use, but I'd like to fix it, if possible!
Hi Lucy, Thank you for the question. This would be an issue with the Water Inlet Valve, PartSelect Number: PS1583805. The valve can become stuck open and allow water to leak info the tub when not in use. Hope this helps!
24 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Tom - For model number LSE7800ACL
October 7, 2017
Hi lid switch was bad because of solenoid. Part is unavailable so bypassed lid switch. The machine will not fill with water on start up but will do rinse cycle. The water inlet switch is new. Did i louse up something bypassing the lid switch. Thankstom
Hi Tom,
Thank you for your inquiry. If your washing machine is not filling with water then you may have check the continuity of the lid switch to see if it is working correctly. A lid switch that is not working correctly can cause this issue. I hope this helps. Thank you and have a great day!
9 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Todd - For model number A482
March 30, 2018
Hello, the warm and hot water fill for wash cycles but no cold water for the wash and rinse cycles. I removed some sediment in the screens but still no cold water. Cold water flows through the fill hoses...thanks!
Hi Todd,
Thank you for your question. It sounds like the cold water solenoid might be broken on your valve. You can test the part to see if that is the case, but it sounds like you will need to replace your valve. I hope that helps. Good luck with your repair.
6 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Stu - For model number LA112
April 25, 2018
Tub overflows when not in use. I use only cold water with hot turned off at source, would that be the problem? Thank you
Hi Stu, Thank you for the question. This sounds like an issue with the Water Inlet Valve, PartSelect Number: PS1583805. The valve may have become stuck open and is allowing the water to flow through when not in use. Hope this helps!
5 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Rich - For model number A9400
April 4, 2019
I have no selection of water mixture. I only have warm/cold. When i switch it to any of the others like hot/warm, cold/cold etc the water just trickles in. What could be the problem?
Hello Rich, Thank you for the question. This sounds like an issue with the temperature Switch, PartSelect Number PS2017425. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
John - For model number LAT7800ABW
September 5, 2023
since replacing the cold water hose the water temperatures are no longer what the 4 switches say they should . ie; cold/cold now gives out hot only and other 3 screwed up to . Help
Hello John, thank you for getting in touch. To help you replace the water inlet valve correctly, we have attached a relevant video to help you with the process. It will resolve the hot and cold water issue. Glad to be of assistance!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Tom - For model number A512
May 8, 2023
Washing machine leaks water onto floor, but only when warm water is used. Does not leak water on cold/cold cycle.
Hi Tom, thank you for reaching out. We would recommend checking for any kinks/damages to the hoses and tightening any loose connections. If that does not help, then the issue is most likely related to the water inlet valve, part number PS1583805. We hope this sorts out your problem!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Milon
April 22, 2019
I have a top loading Amana washer that the hot water constantly run is it the inlet valve stuck open
Hello Milon, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Savannah
November 28, 2017
Only the cold water intake vale is stripped, do i need to replace both hot and cold intake vale
Hi Savannah,
Thank you for your question. If this is the valve that you would need to replace, you would have to replace the whole thing. Unfortunately it does not come in parts. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
David - For model number LAT9593AAW
May 24, 2019
While the tub is filling water runs out of the crack between the cabinet and the top in the left rear corner right above the water inlet valve.
Hi David, thank you for your question. It sounds like you might want to inspect your valve to see if it is broken or if the hoses that attach to it are broken and need to be replaced. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
My Orders
