![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Heating Element Brass Nut Specifications
This nut is sold individually. It is used to install the heating element.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Heating Element Brass Nut
![Replacing your Frigidaire Dishwasher Heating Element Brass Nut Replacing your Frigidaire Dishwasher Heating Element Brass Nut](https://img.youtube.com/vi/vDxcXmE5lmA/maxresdefault.jpg)
Troubleshooting
This part works with the following products:
Dishwasher, Air Conditioner.
This part works with the following products:
Frigidaire, Kenmore, Amana, Crosley.
Part# 154106202 replaces these:
AP3965251, 1196115, 08014807, 0806834, 154106201, 3018118, 3351029, 40571, 4162518, 5300806834, 5303351029, 8-6834, 80-6834, 8014807, 806834, 89637-1, S000007201, WS7201
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Roger D - December 22, 2023
Verified Purchase
Dish Washer leak
The part fit perfectly, I replaced both nuts. No leaks now.
James B - March 23, 2023
Verified Purchase
Very easy
Fit like a glove
Harvey G - August 22, 2022
Verified Purchase
Part was as expected
Part is what I had requested - I did buy an extra one just in case - didn't need it - but will have as a spare.
Frank P - August 18, 2022
Verified Purchase
Saved my 15 year old dishwasher and a service call.
This simple part fixed my dishwasher as the tub was leaking from the original brass nut which had cracked. They also provided a link to an installation video. I took their suggestion to replace both nuts, although the second one wasn’t leaking it has started to crack also. Hard to find but their parts diagram was extremely helpful. Overall an excellent experience start to finish. Thank you Partselect.ca
Jason M - February 10, 2022
Verified Purchase
Easy process
Part select made it easy to get a basic part my local appliance shop wanted 3x the cost and 2 weeks to deliver.
Daniel R - March 10, 2021
Verified Purchase
Exact match
Parts arrived in a timely manner and were an exact fit.
Peter D - February 6, 2019
Verified Purchase
Worked as expected
Worked well... got it sooner than I thought. I bought two of them and taped the spare one near the slide in case it ever happens again.
MICHAEL H - August 29, 2018
Verified Purchase
Same as OEM part.
Percext fit to my need
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 21 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking under the dishwasher
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
Other Parts Used:
-
Dennis from Tryon, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
77 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element corroded, not heating
Removed bottom plate and heating element brass nuts. Disconnected heating element. Connected new one then replaced brass nuts. Put bottom plate back on. Very easy.
Other Parts Used:
-
Denise from Burnt Hills, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
36 of 41 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heater element burnt out (black spot)
Make sure power is off. Remove metal toe kick with fillips screw driver. Reach under dishwasher with 1/2" open
end wrench and completly unscrew brass nuts from element ends. Then open door and pull element ends straight up. Note: As you pull element ends up (inside washer) you are also forcing the element end wire connectors to come off underneath. The electricial connectors are very hard to get off any other way.
Wendell Hensley
Madiso0nville, Tn
end wrench and completly unscrew brass nuts from element ends. Then open door and pull element ends straight up. Note: As you pull element ends up (inside washer) you are also forcing the element end wire connectors to come off underneath. The electricial connectors are very hard to get off any other way.
Wendell Hensley
Madiso0nville, Tn
Other Parts Used:
-
Wendell from Madisonville, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from under dishwasher
Removed lower trim covers (2 Phillips screws) disconnected power supply at breaker box. Removed wire from heating element, removed (broken) brass nut, unclipped heating element and removed. Removed flat washers and replaced with new grommets. Kind of tricky getting them in there. Also had to lube them with silicone to get the element back through. Installed new brass nuts and installed wire connectors. Reset breaker and started diswasher to verify repair. No leaks, working just fine, reinstalled lower trim covers
Other Parts Used:
-
Eric from Holly, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak underneath dishwasher
Unplugged dishwasher, removed the 2 wires clipped to the heating element, removed both cracked nuts, replaced with new nuts from PartSelect, clipped on wires, plugged in and did a test cycle. Based upon service quote from Best Buy, I saved myself $125.00 for just the call out, not including parts and labor.
Other Parts Used:
-
Richard from New Orleans, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
11 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking out of small gold nut
The nut was split down one side, so I first tried to sauder the nut back together. Saudering never goes well for me anyway, but I couldn't get a good enough seal around the nut to make it fit tightly. Then I had to cut off the clear plastic shield to get down in there, just before realizing you could just pull the white wire firmly and it would come loose from the nut. All I had to do then was unscrew the original nut, and screw on the new nut. Then, luckily I had mistakenly ordered an extra clear plastic shield and could replace the one I had previously cut. Dishwasher now runs like a charm!
Other Parts Used:
-
Emily from Kyle, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking
I turned the power off at the circuit breaker. I then took the access panel off the dishwasher at the bottom. I pulled the wire off the connector. I used a plied to remove the broken washer and replaced with new part. I put everything back in reverse order and ran the dishwasher. I than checked for leaks over two days while the machine was running and everything was fine. Thank you Parts Select for saving me $500!
Other Parts Used:
-
Tony from Lavallette, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking caused by a cracked brass nut attaching to the heating element.
First I removed the two screws that hold the dishwasher in place, I pulled out the dishwasher and on the bottom right located the leak. The two brass nuts that hold the heating element in place. The wires had been rusted to the element so I cut the wires (and later spliced them back together) and unscrewed the brass nuts. I ordered the part after finding them very easily on partselect.com and 2 days later screwed them back on to the dishwasher. Spliced the wires back together and put the dishwasher back in place.
Easy Fix.
Easy Fix.
Other Parts Used:
-
zachary from Mayfield Heights, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking
I read the instructions that others had posted and completed the repair in less than 5 minutes!
Other Parts Used:
-
Alina from Orange, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wasn't cleaning properly
I just did the repair just like the video suggests to fix it. I disconnected the power cord, shut off and took apart the water inlet line, and drain line. Unscrewed the top of the washer from the cabinet and pulled out the dishwasher. Tilted the washer to better get to the bottom and took off the connecting wires (red and white.) Unscrewed the brass nuts holding the heating element and removed the element from the machine. Took out the bottom sprayer arm. Replaced the element, replaced the brass nuts and connected the wires back up. Put the sprayer arm back in. Pushed the machine back into place and re-secured the top to the cabinet. Hooked all water, drain, and power lines back up and all was good again.
Other Parts Used:
-
James from CHERRY TREE, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leighton
October 5, 2017
I saw a video on replacing heating element brass nut but thinking about replacing the grommet at same time. Is there a video on that replacement available for that job
For model number FDBB944CB0
Hi Leighton,
Thank you for your inquiry. I am not showing a video listed with the grommet on our website, but a customer has left a comment as to how they have installed the part. "Removed lower trim covers (2 Phillips screws) disconnected power supply at breaker box. Removed wire from heating element, removed (broken) brass nut, unclipped heating element and removed. Removed flat washers and replaced with new grommets. Kind of tricky getting them in there. Also had to lube them with silicone to get the element back through. Installed new brass nuts and installed wire connectors. Reset breaker and started dishwasher to verify repair. No leaks, working just fine, reinstalled lower trim covers" I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Karen
December 3, 2018
One question if this brass nut keeps breaking why keep using it. We paid 129.00 dollars to fix it but our repair man only had one nut both were broken. We replaced one and dishwasher is working fine no leaks how come we are replacing second nut ourselves
Hello Karen, Thank you for the question. We believe this is a concern you need to address with the manufacturer. We are a company that simply sells replacement parts. We do not manufacture any units, provide technical support, authorize substitutes, or fulfill warranty claims. Please make contact with your manufacturer directly. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1524878
Manufacturer Part Number: 154106202
Manufacturer Part Number: 154106202
Brand
Model Number
Description
Kenmore
5661558580
Dishwasher
- Kenmore Dishwasher Model 566.1558580 (5661558580, 566 1558580) Parts
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)