Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
October 24, 2023
New Water Inlet comes with a gasket. Where should the gasket be located? On the exterior or interior of the cabinet wall?
For model number SHE53TL5UC/02
Hi Steve, thank you for the question. The gasket is located on the exterior of the cabinet wall under the cover. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 2, 2023
This dishwasher displays error E26 when run in diagnostic mode.
The operational problem with it os that the water inlet solenoid is not activated at the start of the wash or rinse cycles but it does open later on in the cycle. Can you recommend which parts need to be replaced to fix the problem?
Thanks
For model number SHX53T55UC/09
Hello Mark, thank you for your inquiry. According to our research, the error code E26 indicates that there is an issue with the analogue pressure sensor. We would recommend replacing the float switch. The float switch comes with the housing. The float switch assembly for your model is part number PS8737139. It shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. We hope this information helps!
Good day to you,
My Bosch Dishwasher SHP65T55UC/2 came up with E-15 error and it now transpires that the water inlet valve (I think it is), at the bottom left hand corner of the machine is leaking. (I sent you a photo of the leaking part by email).
Kindly confirm part number/s so that I can order replacement/s.
Thank you!
For model number SHP65T55UC
Hi Rob, thank you for reaching out. According to our research, the E15 error code indicates that there is too much water at the base of the dishwasher. We would suggest checking the diverter assembly, part number PS8737182. It controls the flow of water to the spray arms. If too much water enters the dishwasher, it may start leaking and may reach the electrical components as well. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12741990
Manufacturer Part Number: 11030996