SHP65T52UC (09) Bosch Dishwasher - Overview

Sections of the SHP65T52UC

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey – Part Number: 00611475
Dishrack Roller - Grey
★★★★★
★★★★★
(37)
PartSelect #: PS8727387
Manufacturer #: 00611475
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$20.08
  In Stock
Access Valve – Part Number: 10023852
Access Valve
★★★★★
★★★★★
(89)
PartSelect #: PS16746057
Manufacturer #: 10023852
This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into...
$46.92
  In Stock
Mounting Bracket – Part Number: 00619985
Mounting Bracket
★★★★★
★★★★★
(8)
PartSelect #: PS8728568
Manufacturer #: 00619985
Sold individually.
$14.17
  In Stock
SEALING – Part Number: 12054183
SEALING
★★★★★
★★★★★
(35)
PartSelect #: PS18375762
Manufacturer #: 12054183
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to...
$23.53
  In Stock
Dishwasher Circulation Pump with Heater – Part Number: 12008381
Dishwasher Circulation Pump with Heater
★★★★★
★★★★★
(108)
PartSelect #: PS11724988
Manufacturer #: 12008381
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and ...
$216.29
  In Stock
PUMP-DRAIN – Part Number: 00631200
PUMP-DRAIN
★★★★★
★★★★★
(28)
PartSelect #: PS11704799
Manufacturer #: 00631200
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects...
$69.01
  In Stock
FILTER-MICRO – Part Number: 00645038
FILTER-MICRO
★★★★★
★★★★★
(22)
PartSelect #: PS8730270
Manufacturer #: 00645038
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
  In Stock
Dishwasher Spray Arm – Part Number: 00745856
Dishwasher Spray Arm
★★★★★
★★★★★
(25)
PartSelect #: PS8737036
Manufacturer #: 00745856
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that...
$44.07
  In Stock
Dishwasher Hosedrain – Part Number: 00744881
Dishwasher Hosedrain
★★★★★
★★★★★
(17)
PartSelect #: PS8737004
Manufacturer #: 00744881
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or ...
$39.01
  In Stock
Lower Dishrack – Part Number: 20007189
Lower Dishrack
★★★★★
★★★★★
(8)
PartSelect #: PS18375870
Manufacturer #: 20007189
If your dishwasher’s bottom rack is broken or rusted, this replacement rack can help get things back in order. It’s designed to fit a variety of Bosch, Thermador, and Kenmore models and holds your dis...
$211.17
  In Stock
HOLDER – Part Number: 00616990
HOLDER
★★★★★
★★★★★
(2)
PartSelect #: PS8728043
Manufacturer #: 00616990
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
  In Stock
LID – Part Number: 00611322
LID
★★★★★
★★★★★
(7)
PartSelect #: PS8727344
Manufacturer #: 00611322
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
$33.15
  In Stock

Questions And Answers for SHP65T52UC

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laurent
February 25, 2023
My dishwasher is overfilling and leaking from the door. We get the Er 15 code early in a wash cycle because the float in the base cuts off water intake. What part(s) do I need to replace?
For model number SHP65T52UC
PartSelect logo
Hello Laurent, thank you for your inquiry. According to our research, this error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated. There are usually coarse and fine filters. If they are clogged, you will get water overflowing. To clean the filter, remove and wash it with soap, warm water, and a brush. If the filter cannot be cleaned effectively or if it is damaged, you may need to replace it with part number PS8730270. If this is not the issue, we would recommend checking the water inlet valve, part number PS16746057. The water inlet valve opens to allow water to enter the dishwasher. If the water inlet valve is stuck open, the dishwasher will continue to fill with water until the dishwasher leaks or overflows. If the problem persists, we would recommend replacing the float switch assembly, part number PS8737139, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Jarrod Fleck
13 days ago
Can I just buy the stops on the top rail. It measures 7/8”
For model number SHP65TL5UC
PartSelect logo
Hi Jarrod, thank you for your inquiry. No, the stops on the top rails are not available as separate parts. They come with rail assembly, part number PS8737003. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the SHP65T52UC

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A prong in the bottom rack had broken nearly through where it attached to the base & was rusting severely. Several other prongs had also started to rust.
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.

The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design improvement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
Parts Used:
Lower Dishrack
  • Patricia from DALLAS, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
51 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
E:15 error code with Watertap
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.

In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.

I see now why the pump keeps running after this error. In this case, it would have led to a big flood in the kitchen if it did not.

I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.

Be sure to turn off breaker before servicing. Don't get shocked!

Be sure to turn off water before starting! Or, you'll have a flood.

Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.

Good luck!
Parts Used:
Access Valve
  • Raymond from VIENNA, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
45 of 68 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The middle rack was rusting and some of the pegs were coming off.
Removed the spray arm, front handle, and little clips from the old rack and installed onto the new rack. Was very simple.
Parts Used:
CROCKERY BASKET
  • Susan from MIDDLEBURY, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
19 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!