Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
March 16, 2023
I have a trouble code f3e3, is this the thermistor that the troubleshooting guide talks about that is the problem or is it the wp8577274 thermistor.
For model number wgd5620hwo
Hello Thomas, thank you for the question. This error code indicates there might be a problem with the thermistor. We suggest you replace the thermistor, part number PS11746740. We hope this helps, good luck with this repair!
Where is this part on the dryer and what is the easiest way to access it and replace it
For model number WGD5620HWO
Hi Thomas, thank you for reaching out. According to our research, the thermistor is located on the back under the lower access panel. You will need to remove the back panel by removing the screws from it. The thermistor will be attached below, you can detach it and replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Joe
June 6, 2023
The dryer won’t start and the light for “check lint screen “ come on. After few tries, it starts again. And the cycle repeats itself, starting and not starting.
For model number MGD3500FWO
Hi Joe, thank you for writing in. Our research shows that if the dryer is not starting or starting intermittently there is an issue with the door not closing properly. This would also cause the lint trap indicator to turn on. Make sure there is no dirt or clothing from preventing the door to close properly. If here is nothing in the way then you will have to replace the door switch. Part number PS12745626 is the part you need. We hope this helps.
this dryer is showing a f1 and f3 code and will not finish a cycle.
For model number WGD5620HW0
Hello Nicholas, thank you for reaching out. Based on our research, both of the error codes you mentioned indicate an issue with the control board. We would recommend checking the control panel assembly, part number PS12728559, to fix the issue. We hope this solves your problem!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12731174
Manufacturer Part Number: W11396709