THERMISTOR
Fits your 7MMGD6630HC1 Dryer!
$49.60
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 7MMGD6630HC1 Dryer!
PartSelect Number
PS12731174
Manufacturer Part Number
W11396709
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Maytag, Amana, Kenmore.
Part# W11396709 replaces these:
W10623852
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
March 16, 2023
I have a trouble code f3e3, is this the thermistor that the troubleshooting guide talks about that is the problem or is it the wp8577274 thermistor.
For model number wgd5620hwo
Hello Thomas, thank you for the question. This error code indicates there might be a problem with the thermistor. We suggest you replace the thermistor, part number PS11746740. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Thomas
March 17, 2023
Where is this part on the dryer and what is the easiest way to access it and replace it
For model number WGD5620HWO
Hi Thomas, thank you for reaching out. According to our research, the thermistor is located on the back under the lower access panel. You will need to remove the back panel by removing the screws from it. The thermistor will be attached below, you can detach it and replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Joe
June 6, 2023
The dryer won’t start and the light for “check lint screen “ come on. After few tries, it starts again. And the cycle repeats itself, starting and not starting.
For model number MGD3500FWO
Hi Joe, thank you for writing in. Our research shows that if the dryer is not starting or starting intermittently there is an issue with the door not closing properly. This would also cause the lint trap indicator to turn on. Make sure there is no dirt or clothing from preventing the door to close properly. If here is nothing in the way then you will have to replace the door switch. Part number PS12745626 is the part you need. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Nicholas
April 24, 2024
this dryer is showing a f1 and f3 code and will not finish a cycle.
For model number WGD5620HW0
Hello Nicholas, thank you for reaching out. Based on our research, both of the error codes you mentioned indicate an issue with the control board. We would recommend checking the control panel assembly, part number PS12728559, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12731174
Manufacturer Part Number: W11396709
Manufacturer Part Number: W11396709
Brand
Model Number
Description