Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Not drying dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Tappan.
Part# 5304518927 replaces these:
AP6810011, 154335802, 154414201, 154496901, 154496902, 154550002, 154567701, 154567702, 5304507175
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Randy T - April 3, 2024
Verified Purchase
Fit Perfect
Easy to install, quick delivery
Tim R - March 2, 2024
Verified Purchase
Right part!
Fast shipping, easy install
ROBERT B - February 11, 2024
Verified Purchase
Easy Repair
Worked as expected. Past repair
Justin B - January 10, 2024
Verified Purchase
Easy install and works great
Part came very quick and I had my dishwasher up and running in minutes
Shawna M - April 12, 2023
Verified Purchase
Easy job, great price!
The part replaced my broken spray arm and it works exactly how it should.
Joseph G - March 30, 2023
Verified Purchase
came quick works perfect
came quick works perfect
Terence L - December 15, 2022
Verified Purchase
Spray arm
Easy to order and work well
Valerie C - November 17, 2022
Verified Purchase
Great part
Wow so glad I found you site. Ordered the part and due to the depot only 2 hours away had it the next day. Part fit perfect and cleans better than before. The lady who I ordered through is a wonderful asset to your company. Costumer service was wonderful. Thank you
Alan S - September 26, 2021
Verified Purchase
So far so good
I bought this replacement because the original one melted in the dishwasher and broker. The replacement bought is doing a good job so far.
Raphael G - July 16, 2021
Verified Purchase
easy repair
the part was in great condition
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 26 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Melted spray arm resulted in leaky dishwasher
Over Thanksgiving, the spray arm in my dishwasher apparently popped off and was partially melted. I remounted it inside the dishwasher, but the new hole was on the side of the arm. I think this resulted in water being sprayed directly against the door and not up through the top holes. It flooded my kitchen floor.
The spray arm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.
The spray arm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.
Other Parts Used:
-
Allison from Greenville, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
103 of 111 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray Arm melted to heating elment
Removed old arm from elment. then replaced with new one.
Other Parts Used:
-
William from Pittsburgh, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
30 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm pop out and broken
Only took me 5 sec, just push it in. Good as new. Thanks for the fast deliver .
Other Parts Used:
-
YUAN from ROWLAND HEIGHTS, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
16 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower sray arm
Pulled the broken one off, snapped the new one on.
Other Parts Used:
-
Randy from Valley Springs, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm came off and melted on coils
took it out of the bag and snapped it in. Less than 10 seconds.
Other Parts Used:
-
Susan from North Wales, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray arm was knocked off and melted on the element
I just popped on a new Arm. So easy. The amazing thing was how fast I had the part and how easy it was to find on Partselect.com. I ordered the part Monday and had it Tuesday. I was stunned and the tenant was impressed.
Other Parts Used:
-
thomas from Jeffersonville, VT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
10 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm fell off and melted
Snapped the new one on
Other Parts Used:
-
Jacob from Wichita, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
10 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray Arm popped of during cycle and melted
Found your website, red the reviews, followed the simple instructions provided by others that had had the same problem and repair was complete in less than a minute. No tools needed. I am a handy girl and tackle a lot of repairs/projects, this is the first time that the job was actually easier than stated. Thanks for providing a good porduct, at a decent price WITH LAYMAN INSTRUCTIONS!!!
Other Parts Used:
-
Lisa from El Paso, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray arm had come disconnected and fell on the heating element -- melting part
pulled the old part off (no tools required) and snappen on new spray arm
Other Parts Used:
-
Lee from Columbus, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray arm came loose during cycle and melted onto the heating coil
Remove old spray arm and pressed the new part into place. Let the dishwasher run and the load came out very clean. Overall very pleased.
Other Parts Used:
-
matthew from Fayetteville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brenda
April 25, 2022
Hi! How do I remove this part for my dishwasher?
For model number FBD2400KW3A
Hello Brenda, thank you for your question. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
9 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 25, 2022
GOES THRU ALL CYCLES BUT DOES NOT WASH DISHES
For model number TDB210RFS2
Hello James, thank you for writing. It could be a faulty spray arm part PS12705424. However, the issue may be inadequate water pressure. To correct this, replace the Water inlet Valve PS1990907. We have a video for you to access. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Related Parts:
Christina
October 15, 2021
Water goes in and water will drain out. Nothing else happens
For model number FBD2400KB12B
Hello Christina, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the circulation pump and motor assembly, the latch assembly, and the timer. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good Luck with your repair!
Was this helpful?
Thank you for voting!
Related Parts:
Jeffrey
February 26, 2023
Is the price of this including tax !!!
For model number TDB210RFB7A
Hello Jeffrey, Thank you for your inquiry. This is simply the cost of the part, shipping is chosen from the shipping methods screen after you've added the part to the cart and clicked check out, and taxes are calculated when you enter your full shipping address. We hope this helps.
Was this helpful?
Thank you for voting!
Shelia
March 16, 2023
Have a new lower spray arm. Snaps in but seams to be missing a gasket to allow water to pressurize and lift center towers. Water spills into the tub. Diagram shows Part 24A. How do I find this Part number?
For model number FBD2400KB12B
Hi Shelia, thank you for reaching out. Based on our research, the part you are looking for is the spray arm nut, part number PS420799. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
Kody
June 14, 2023
Spray arm melted on one side, dishes aren’t getting cleaned. Will this part replace the one I have?
For model number Fbd2400kb6b
Hi Kody, thank you for reaching out. The part you mentioned is compatible with your model. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
Alix
July 19, 2023
How do I remove this part from my dishwasher?
For model number FBD2400KW12B
Hi Alix, thank you for the question. According to our research, to remove the existing arm assembly, simply grasp the center of it and lift it up so that it unsnaps from your dishwasher. We have attached a relevant video for you to remove the lower spray arm. This may not be of the exact same model, but will help you with the process. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Elbert C Ri
February 14, 2024
HOW DO I REATTACH THE SPRAYER AT THE BOTTOM THAT CAME LOOSE
For model number FBD2400KW11B
Hello Elbert, Thank you for reaching out. To remove the Spray Arm, grasp the center of the arm and lift up so that it unsnaps from your dishwasher. Good luck with the repair!
Was this helpful?
Thank you for voting!
Lisa
March 27, 2024
For this model, we have the blue spray arm. Do you just pull up on the whole piece to remove it? I want to clean out the filter, but in your video, the spray arm is different than ours.
For model number FBD2400KB12B
Hello Lisa, thank you for your question. Yes, you will have to follow the same instructions, to remove the existing arm assembly, simply grasp the center of it and lift it up so that it unsnaps from your dishwasher. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12705424
Manufacturer Part Number: 5304518927
Manufacturer Part Number: 5304518927
Brand
Model Number
Description