Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nathan S - November 23, 2022
Verified Purchase
Quick shipping
Always nervous ordering on line but Parts Select was quick and easy. The switch was easy to change (university of YouTube lol) and fixed i20 error code on fridgidaire dishwasher.
★★★★★
★★★★★
John A - September 21, 2022
Verified Purchase
Easy Repair
The part was fine, Easy to install, but alas dishwasher worked twice and the I20 is back again. So much for that $100 dollar repair!!!
★★★★★
★★★★★
Joel T - August 24, 2021
Verified Purchase
Great part
Part worked great. Shipping was longer than estimated. Only 1 week though.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
November 29, 2022
Error code. i30 (Electrolux D/W)
No water left in the machine but pump continues to run.
Could this be a pressure switch?
For model number EI24ID81SS2A
Hello Daniel, thank you for reaching out. The error code I30 on your Electrolux dishwasher indicates an internal leak, caused by water collecting in the base of the appliance. The water rises up the float and causes the error. We suggest that you tip the dishwasher over onto the front and then upright again, to remove the water collected in the tray. Also, check the pressure switch, drain hose, water inlet valve, and drain pump. If you require assistance to place an order, please contact customer service. We hope that helps!
Faint smell of wire or plastic melting three quarters thru wash. water in bottom of tub. Machine stopped, will not restart.
For model number FGID2479SF1A
Hi David,
Thank you for your question. If there was a smell of plastic melting and there is still some water in the tub, check the drain pump to see if it clogged or damaged. If the drain pump id clogged or damaged it will need to be cleaned out or replaced. If the drain pump is fine, you will need to inspect the dishwasher to see which part is causing the issue. If you have any questions, please let us know.
What is the correct pressure switch number for this model?
For model number FGID2474QFIB
Hi Carrie, thank you for reaching out. The pressure switch, part number PS11731946, fits your model. If you require assistance to place an order, please contact customer service. We hope that helps!
The pump won’t stop running. It displays 30 on the display on the top of the door.
Is this part the flow switch?
For model number FDSH450LAF4A
Hello Stephen, thank you for your inquiry. Error code i30 means the water is too low. It means that the dishwasher thinks it has flooded with water. You will want to uninstall the dishwasher and tip the dishwasher forward 45 degrees to drain any water out that is in the base pan below the dishwasher. Then re-apply power to the dishwasher and try again. If you still get the error i30 there is a pressure switch on this dishwasher, which is supposed to tell the dishwasher when to stop filling with water and tell the control board how much water is in the tub which is reading incorrectly. This pressure switch, part number PS12586275, would need to be replaced to resolve the issue. Good luck with this repair!
Was this helpful?
Thank you for voting!
Nile
March 6, 2024
Error code i30. I have already drained it multiple times on different occasions. How do I fix permanently.
For model number FGID2476SF0A
Hello Nile, thank you for reaching out. This error code indicates that a leakage has occurred. We would recommend checking the pressure switch, part number PS12586275, to solve the problem. We hope this helps.
Was this helpful?
Thank you for voting!
Bruce
August 27, 2022
The dishwasher is stuck on the drain cycle. It won't allow for me to cancel or reset. There is no water in the bottom of the machine?
For model number FGID2476SF7A
Hello Bruce, thank you for your question. We recommend replacing the Float Switch part PS10057465. Also, ensure that the unit is level. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Robert
September 2, 2022
At completion green light does not go on and code i20 shows in the display. About 2 inches of water lays in the bottom below the filter and screen. Is this a defective pressure switch ? If so what is the correct replacement part ?
For model number FGID2474QF4B
Hello Robert, Thank you for your inquiry. Error code I20 indicates clogged filters or a restricted drain line has been detected, or an issue with the sensor. Check for clogs or kicks in the drain hose and pull out the filter in the drain pump and clean. Test the pressure switch and drain pump with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12586275
Manufacturer Part Number: A00055408