Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lenard
August 10, 2023
When in Quick mode, the dishwasher will finish the prewash cycle. Then when going into wash mode, it will fill up with water start washing then beep and drain the water and when shut down.
When I use the Normal mode, it normally completes the full wash cycle but I had it fail to.
In all cases, it always shuts down after all the water has been emptied.
I've replaced the main board. Any ideas?
For model number MDB4949SHB0
Hi Lenard, thank you for your inquiry. We recommend replacing the sump, part number PS11755471. We hope that helps!
In all wash modes selected the evacuation pump comes on, then the machine fills, a click is heard, but does not begin to wash. No hum from the wash pump can be heard. Is the control board the most likely cause.
For model number MDB8989SHZ0
Hello Ed, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking pump and motor assembly, part number PS11756615, to fix the issue. It pumps water through the spray arms during the dishwashing cycle. We hope this solves your problem!
Dishwasher turns on I can here the pump turn on and the water drain but the arms are not spinning and it does not come out of wash mode, I have change out the motor pump. next on my list is the control board. just want to make sure i am on the right path.
For model number MDB8989SHZO
Hi Grant, thank you for getting in touch. If you have already replaced the circulation pump and the issue persists, you may need to make sure that the spray arms are not obstructed. If that is not causing the issue, then the control board, part number PS12583931, is most likely faulty and may need to be replaced. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Wade
April 10, 2024
Our dishwasher is having issues. The unit will run throuch the wash and dry cycles but sometimes will stop after the dry cycle and leave water in the bottom and other times it stops and it is empty on the bottom. It washes fine and the heat comes on fine. At the end the led on the door is to light up white to indicate its done but it doesnt do that anymore. Sometimes its like it is done with no led lit and other times the cancel button light is on like it is stuck in a cycle. Any thoughts? Thanks!
For model number MDB8989SHZ0
Hello Wade, thank you for your inquiry. Based on the description that you have provided, the issue seems to be with the control board, part number PS12583931. It manages the functions of the dishwasher, such as washing, draining and drying. You may need to replace it to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12583931
Manufacturer Part Number: W11225084
