CABLE HARNESS

It is important to remove the dishwasher to a workable space. Probably best to set it on a slightly higher platform, otherwise you're on the floor.

1. remove racks,
2. disconnect power supply and water line (turn off at source).
3. remove the exterior insulation.
4. One can now access the harness from both side of the washer.
5. Inspect and determine what connection goes where, all have color coded wire.Connections are notched
6. Recommend that each connection is removed and new connection replaced at that time
7.removing screws from the inside door to connect the harness to select connection.
7.button-up the door, replace insulation and reattach water line and power, reinstall machine.
8. You may have to remove the front toe-kick to access routing the wires.