IDLER ARM Assembly
Fits your FGX831FS5 Washer Dryer Combo!
$48.76
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your FGX831FS5 Washer Dryer Combo!
PartSelect Number
PS11775626
Manufacturer Part Number
5304507499
Manufactured by
Frigidaire
Product Description
IDLER ARM Assembly Specifications
This idler pulley assembly is a manufacturer-approved replacement part for your washer/dryer. The assembly includes the idler pulley and arm. The idler pulley provides tension for the belt to rotate the drum. You may notice your idler pulley making a sqeaking or squealing noise, signalling that it needs to be replaced.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Washer Dryer Combo, Washer.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, General Electric.
Part# 5304507499 replaces these:
AP6041641, 131434700, 131623300, 131623310, 131827000, 131863100
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Robert F - October 7, 2023
Verified Purchase
Very easy repair.
The part was received as promised. Removal of old idler arm and installation of the new one together with belt replacement took less than an hour in total and the dryer works like new again.
Tetyana O - August 21, 2019
Verified Purchase
The part was just what we needed
The part was just right. Came in pretty quickly and my drier was up and running the same day. Thank you Part Select for your prompt help.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 1.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
loud squeaking noise from dryer
This is a combo washer/dryer. First, I replaced the Idler Arm pulley but the noise didn't stop - it was easy to replace with two screws holding a access panel door in the back of the unit. Next I had to take off the front of the dryer unit to access the drum bearing and replace the dryer belt. There were many screws and electrical connections to remove. After replacing the drum bearing, there was a plate on the back that had to be held while attaching the screws from the front. Since I was alone, I taped the plate in place to hold it while I attached the screws.
Other Parts Used:
-
Matt from San Leandro, CA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
101 of 172 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing
Customer responses / directions were great nothing to add - except no where does anyone mention "high temperature grease" for the Drum Support Bearing - only on the video is it mentioned numerous times. I honestly think it took longer to vacuum out all the lint then it did to do the repairs.
Other Parts Used:
-
Diane from MADISON, CT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
November 7, 2022
dryer belt came off, pulley seems ok but belt still has too much slack, after reinstalling..spring tension from pulley plenty strong enough..could belt be stretched after 6 years.
For model number 417.61722510
Hello Richard, thank you for contacting us. We would recommend replacing the belt, part number PS1148434. After 3 to 5 years of usage, the belt gets susceptible to wear and tear and can damage other parts like the idler arm. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11775626
Manufacturer Part Number: 5304507499
Manufacturer Part Number: 5304507499
Brand
Model Number
Description