Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amy
December 5, 2019
The start button doesn't work but the rest of the buttons work fine. Which part should I order for this issue?
For model number MDB8959SFZ4
Hello Amy, Thank you for the question. If it is just the one button not working, normally the Control Panel will need to be replaced. Part #: PS11769756 for Black, Part #: PS11769757 for White and Part #: PS11769758 for Stainless Steel. Hope this helps!
None of the buttons work except if I hold in the sanitize button it counts down from 3, 2, 1 but no other buttons light up or operate on the panel.
For model number MDB4949SDZ0
Hello Todd, Thank you for the question. This could be an indication the User Control and Display Board is faulty. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Miranda
April 20, 2023
My start button is sinking and very hard to push down. I am trying to find the part ( control panel) to replace it, but I cant find it. Can you tell me wich part number I need to order?
For model number MDB8959SFZ4
Hi Miranda,
Thank you for your question. The part number for the black control panel is PS11769756. The part number for the white control panel is PS11769757. The part number for the stainless steel control panel is PS11769758. We hope this helps!
the small clips holding the control circuit board in place are broken. The control circuit board moves when the start button is pushed so it will not activate the circuit board. Which part do I need to repair?
For model number MDB8959SFZ4
Hello Phillip, thank you for contacting us. According to our research, the part you are looking for is a clip, part number PS11750041. We hope this helps!
My dishwasher display started to flicker a few days ago. It did a few more washes then quit entirely. Would the control panel be the culprit?
For model number Mdb8959sfz4
Hello David, Thank you for your inquiry. We would recommend checking this part first-check the wiring connections between the control panel and main board as well for any loose wires or visible damage. Hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
