Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stan C - 3 days ago
Verified Purchase
Good but could be better
The part ordering process was excellent. Delivery was great. Part itself is of good but not excellent quality. A little too flimsy for the location - handle- on the dishwasher. It’s the one part you grab every time you open the dishwasher. This is my second handle that I have ordered in the last four years but hopefully the last.
★★★★★
★★★★★
Bill E - May 12, 2023
Verified Purchase
Looks great, easy fix
Handle was exactly like the original and was easy to install
★★★★★
★★★★★
Duaine M - December 9, 2022
Verified Purchase
Easy repair.
Part looked to be an exact match with the original.
★★★★★
★★★★★
Ronald W - September 3, 2022
Verified Purchase
Hard to insert
Do able but one must be carefull. Looks great.
★★★★★
★★★★★
Rebecca W - March 24, 2022
Verified Purchase
Easy repair, Fit Perfectly
The part was exactly the one I needed. It fit perfect and installation was easy.
★★★★★
★★★★★
Evgeny Z - February 20, 2022
Verified Purchase
Easy repair.
The part was in good condition.
★★★★★
★★★★★
Kevin S - November 25, 2021
Verified Purchase
Looks good
Easy to install, Three screws to remove and pop the clips and off it comes.
★★★★★
★★★★★
David P - November 23, 2021
Verified Purchase
Perfect Fit! Dishwasher good as new!
Part was as advertised, easy repair.
★★★★★
★★★★★
Ian S - September 18, 2021
Verified Purchase
Worked as expected
Ordered the part Sunday evening and it was here Tuesday worked as expected was easy to change. It is a weak spot on that dishwasher. So I expect it will happen again. But service was great,will order from here again
★★★★★
★★★★★
Ruth L - March 17, 2021
Verified Purchase
Handle
The part arrived in a very timely manner, packaged well but with minimal instructions. We googled it and managed to install it with no problem. Everything is made of plastic today, but still surprised it cracked. I was grateful to be able to find the part...thankyou.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacing the pocket handle on a Bosch Dishwasher
I removed the 3 #20 torn screws in the handle, and the six #20 tore screws inside the door that hold the outer door skin in place.
The plastic handle has a series of molded hooks that allow it to snap into the stainless steel skin.
To avoid damaging the skin, use a utility knife to cut behind the two large hooks on the bottom of the handle and the one on each end. One trimmed, the handle easily slides out of the door skin.
The new one will effortlessly snap in-place, then reposition the door skin and fasten with the 9 screw previously removed.
Other Parts Used:
Michael from CASTLE ROCK, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle
1 remove three screws from handle 2 remove screws from door panel 3 slide control box up out of outer door panel 4 outer panel is now free and old handle can be removed 5 snap in new handle from front of panel 6 reverse process
Other Parts Used:
Kay from POWELL, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle on Bosch dishwasher had cracked
1) Remove the three torx screws securing the handle.
2) Open door. Placing some cushions under the door makes the operation easier.
3) Remove the 12 torx screws securing the door skin. Note the screws are of two sizes. The lower 6 are shorter and fatter than the upper 6, that also secure the control panel.
4) It’s useful to have a 2nd person or a counterweight to secure the door once the skin is removed.
5) Remove the old handle by snapping the securing tabs.
6) New handle is press to fit.
7) Return skin to door and re-insert screws to secure.
8) Re-insert the three handle screws.
Notes
1) A three red wire cable plug was floating in the breeze when i removed the skin. I assumed it had pulled loose during removal of the skin so inserted back into the control panel but the washer would not power up with it inserted. On removal it worked fine. Not sure it it serves a model specific function.
2) It may be possible to use a car trim pry tool to remove the handle but I was concerned the stainless might be distorted.
Other Parts Used:
spencer from gilbertsville, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henk
January 8, 2018
I have difficulties removing the old handle part despite removing the 3 screws. Are the ends of the handle glued in? Appreciate a response. Thx!
Hello Henk, Thank you for your inquiry. You will have to remove the inner door panel and the control panel screws to remove this from the panel of the unit. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Justin
November 20, 2019
I just replaced the front door handle which required outer skin removal as well. Put it all back together and now it will not turn on. All connectors seem to be plugged in and my breaker did not turn off. What do I look for next?
For model number SHP68T55UC/07
Hi Justin,
Thank you for your question. If you have checked all the connections in the dishwasher door and they check out fine, and the dishwasher will still not start, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/Repair/Dishwasher/Will-Not-Start/. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
September 6, 2023
The top strip of trim on the door handle is broken in two places. The handle itself is fine. I only want to replace the little silver strip at the top. It broke within a week of getting the dishwasher years ago and was replaced. I'm sure the repairman didn't take the whole door off. Is the little strip available as a replacement? I don't want to risk taking the door off to replace the whole - working - handle.
For model number SHP65T55UC/02
Hi Kathy, thank you for the question. According to our research, the strip for the door handle for your model does not come separately. You may have to replace the door handle, part number PS11758453. Let us know if you have further questions!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
