Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark Dowse
December 20, 2018
Takes a long time to heat up, then shuts off.
For model number MER8775AS0
Hello Mark, thank you for your question. We would recommend testing the oven sensor first, PartSelect Number: PS11749737. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor is tested and is not faulty the electronic board should be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marquet
March 19, 2018
Will this part fix error f2e0
For model number mer8775aso
Hello Marquet, thank you for your question. The error F2 E0 is in reference to the key panel on the electronic control board. For your model the key pad is a part of the whole electronic control unit so you would want to order part number Control, Electric Part Number: PS11756982 for a white unit or Part Number: PS11756559 for black. Replacing this part will fix that error code. I hope this helps!
Was this helpful?
Thank you for voting!
Mark
December 20, 2018
What is the circuit board part number in the stainless color?
For model number MER8775AS0
Hello Mark, thank you for your question. The control board in stainless is not available anymore. The manufacturer only provides this part in white and black. The black one is part number W10348719. I hope this helps!
Was this helpful?
Thank you for voting!
John
January 14, 2019
Oven heats up and temps start to drop example set at 350 seems to heat up display says 350 but temp in oven drops after few min to only 250
For model number MER8775AS0
Hi John, Thank you for the question. This sounds like an issue with the Oven Sensor, PartSelect Number: PS11749737.This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
