Part Videos
Replacing your Whirlpool Dishwasher Door Latch - Black
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close | Will Not Start | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10653840 replaces these:
AP6023622, W10574864, W10653840
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Andrew C - March 24, 2024
Verified Purchase
Fixed the problem
Dishwasher kept not working or skipping cycles. Everyone suggested replacing the switch. East to replace. Saved having to buy a new washer. Thanks Partsselect!!!
Alvin Jason C - February 10, 2024
Verified Purchase
Part is perfect fit for my unit and good condition
Part is perfect fit for my unit and came in fast. Unfortunately this is not the cause of my issue. Troubleshooting continues.
Anthony W - October 28, 2021
Verified Purchase
Quick delivery and right part
Delivery was next day in a part that was hard to find anywhere else.
Stephen M - May 22, 2021
Verified Purchase
Quick delivery!
Had to get both a latch and handle. Loved how you just enter the part number and it’s there! Got it in 3 days and installed fine. Was quicker and better than calling a repair guy.
Gaston P - April 24, 2021
Verified Purchase
Dishwasher door latch
The latch was the the fix to prevent our dishwasher door from opening while the washer was running.
Donald S - March 31, 2021
Verified Purchase
easy repair, part fit perfect and fix the problem
part arrived in excellent condition and in a timely manor
Ken W - January 2, 2021
Verified Purchase
Makes life easy.
Easy to install and solves a big problem.
Wade M - October 17, 2020
Verified Purchase
Easy repair
The part arrived promptly, was easy to install, and fixed the problem.
Allison T - September 29, 2019
Verified Purchase
easy reppair and the right part
Everything went great
Jon P - July 25, 2019
Verified Purchase
My dishwasher works again
Part worked as advertised, easy to install and saved me the cost of a service call
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door would not latch shut
Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box.
Other Parts Used:
-
RONALD from PRESCOTT, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch wouldn't close
Turned off power to the dishwasher. Removed the front panel via the screws on the inner wall of the door. Lifted and pulled out the front panel. Disconnected cable connections to fully remove the front panel. Pressed down on the latches to the left and right side of the door latch. Pulled out the door latch. Put in new door latch until it clicked into place. Reattached cable connections. Put the front panel back on with the screws. Turned back on power to the dishwasher.
Other Parts Used:
-
Colin from Goffstown, NH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When cycling through it would stop up to 3 times & have to be restarted.
Replaced door latch
Other Parts Used:
-
Edna from WEST MONROE, LA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door stopped latching properly.
Initial inspection of the issue and research suggested the door latch was malfunctioning / broken. I bought the part and expressed it home. The installation involved removing the door screws on the inside of the door, separating the front and back panels, unplugging the door latch, removing it from its niche and popping in the new one. Reverse the take apart and it was done. Very simple swap. Hardest part was juggling the two halves of the door and preventing the door for trying to close in the process as the bulk of the weight is in the outside half of the door.
The new part did not fix the issue. The door strike was the next part that could be broken / malfunctioning. I ordered that part as well and replaced it. In the process of replacing it I found that the original door strike had been installed upside down. I am guessing it was installed at just the right pitch, or maybe even bent at the manufacturing facility, so that it latched. No idea how it managed two years like that. I installed the new one correctly and the door latches perfectly. Both parts I removed from the unit I will retain if my new parts should fail in the future.
The new part did not fix the issue. The door strike was the next part that could be broken / malfunctioning. I ordered that part as well and replaced it. In the process of replacing it I found that the original door strike had been installed upside down. I am guessing it was installed at just the right pitch, or maybe even bent at the manufacturing facility, so that it latched. No idea how it managed two years like that. I installed the new one correctly and the door latches perfectly. Both parts I removed from the unit I will retain if my new parts should fail in the future.
Other Parts Used:
-
Bryca from TULSA, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking around door and latch mechanisim seems to have failed
Still not sure it is repaired. Still have water leakage around upper edge of door on control data panel. We just experienced an issue with the auto drain system, the first since door seal repair and door latch replacement???? Is the latching mechanism suppose to secure the door?
If so it isn't?
Not a great success story. A new washer may be in the cards
If so it isn't?
Not a great success story. A new washer may be in the cards
Other Parts Used:
-
Robert from PORT LUDLOW, WA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756967
Manufacturer Part Number: WPW10653840
Manufacturer Part Number: WPW10653840
Brand
Model Number
Description
Kenmore
66512772K311
Dishwasher
- Kenmore Dishwasher Model 665.12772K311 (66512772K311, 665 12772K311) Parts
Kenmore
66512773K311
Dishwasher
- Kenmore Dishwasher Model 665.12773K311 (66512773K311, 665 12773K311) Parts
Kenmore
66512774K311
Dishwasher
- Kenmore Dishwasher Model 665.12774K311 (66512774K311, 665 12774K311) Parts
Kenmore
66512776K311
Dishwasher
- Kenmore Dishwasher Model 665.12776K311 (66512776K311, 665 12776K311) Parts
Kenmore
66512779K311
Dishwasher
- Kenmore Dishwasher Model 665.12779K311 (66512779K311, 665 12779K311) Parts
Kenmore
66512782K311
Dishwasher
- Kenmore Dishwasher Model 665.12782K311 (66512782K311, 665 12782K311) Parts