Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Amana, Crosley.
Part# WPW10597205 replaces these:
AP6023311, W10597205
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Matthew S - January 18, 2023
Verified Purchase
Its the part
It is exactly the part that was needed for my whirlpool, but its hard to leave a 5/5 with it being so expensive and not to mention that this is the second time i had to buy one for a 4 year old washer, and this one did cost more then the first.
Cassandra L - September 10, 2019
Verified Purchase
Easy repair
Received part promptly and had no problems all around
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MARK
May 9, 2023
HOW TO REPLACE THE BAFFLES
For model number WFW75HEFW0
Hello Mark, thank you for your inquiry. We have found some relevant instructions for installing the baffle. They may not be of the exact same model, but they will help you with the installation. You may follow the following steps:
1. Open up the washer door and knock off the old baffle from the drum.
2. If the old baffle is stuck, knock it from place by pushing it straight toward the back of the drum and by giving it a good sharp strength with the palm of your hand or a rubber mallet.
3. Take a flat-blade screwdriver and pry up the tabs in the drum gently.
4. Set the new baffle into place by pushing the pins into the tabs. Give the baffle a sharp pull forward and that will lock it in place.
We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756653
Manufacturer Part Number: WPW10597205
Manufacturer Part Number: WPW10597205
Brand
Model Number
Description