This washer drain pump is designed to remove wastewater during and after the wash cycle, ensuring proper drainage and efficient operation. If your washer retains water after a cycle or shows signs of ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This door bellow, also referred to as a door seal gasket, is an OEM replacement component designed for various front-load washing machine models. Made from flexible gray rubber, it forms a secure barr...
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
This door lock is an essential component for maintaining the safety and functionality of your washing machine. Located on the inner portion of the door frame, it secures the door during operation, pre...
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
This dispenser drawer assembly is a genuine OEM replacement part for select washing machines. It holds and dispenses laundry additives such as detergent, fabric softener, and bleach during wash cycles...
The washer drum baffle is a genuine OEM replacement part that lifts and tumbles clothes for even washing and effective water extraction. Designed for select washing machines, it ensures proper laundry...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Questions And Answers for MHW5100DW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
March 31, 2022
In order to replace the door hinge do i have to remove the entire inside door panel?
For model number MHW5100DW0
Hello Jack, Thank you for your inquiry. You should only need to remove the door in order to replace the hinge. Although we do not have a repair video for this exact part number, we have included a link to our repair video for a similar hinge to give you a general idea of the repair. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The power in the neighborhood went out while washing close and we heard a distinct pop. Now the washer is completely dead. Circuits are good to the unit and so is outlet. Washer will not turn on at all and is locked with clothes inside. Any ideas? Appliance repairmen in our area are booked 10 days out. If we can repair ourselves, would like to.
For model number MHW5100DW0
Hello Susan, thank you for reaching out. We have researched your model and found that this issue could be caused by a faulty door lock, part number PS11754810. If that does not help, we would recommend replacing the control board, part number PS11770319. Please reach out to customer service if you need help placing an order. Glad to be of help!
Hello Tai, thank you for your question. No. There is not a bell or chime on this unit. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bernard
April 11, 2025
I have never cleaned the filter. Does this model have one that needs to be cleaned?
For model number MHW5100DW0
Hello Bernard, thank you for contacting us. According to our research, your model does not come with any filter that needs to be cleaned. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bernadette
October 26, 2025
how do i replace the shocks
For model number MHW5100DW0
Hello Bernadette, thank you for getting in touch. We have researched your model number and found a relevant video on how to install the shock absorbers. Here is the link: We hope this helps.
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
