Part Location Diagram of WPW10525371 Whirlpool Washer Electronic Control Board
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Washer Electronic Control Board

 Fits your IFW7300WW00 Washer!
$391.01
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your IFW7300WW00 Washer!
PartSelect Number PS11755972
Manufacturer Part Number WPW10525371
Manufactured by Whirlpool
Product Description

Washer Electronic Control Board Specifications

The electronic control board manages the washer's functions such as filling, washing, draining and spinning.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Amana, Whirlpool, Inglis.
Part# WPW10525371 replaces these:
AP6022637, W10253240, W10306715, W10525371
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Aaron
January 13, 2022
We experienced a power outage and afterwards the washer won't start. I unplugged and waited a few minutes then plugged back in. There is a continuous beeping. This stops after I push the start button. When I push the start button again the rinse light blinks once and a single beep sounds. That's all the machine will do. It was manufactured in 2011 but is not in a primary usage home so hasn't been used very much compared to a normal household usage.
For model number WFW9050XW00
PartSelect logo
Hello Aaron, Thankyou for the question. With a power outage it can cause a surge that will damaged one or both of the control boards. We suggest checking the board to see if they have the proper voltage and if there is any evidence of burn marks or a short. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Leland
January 17, 2023
this machine has problem starting. when started it runs and fills as it should ,after 2-3 minutes it stops and beeps when restarted by pushing start or unplugging and replugging unit the water drains, spins a minute and stops again. this can be repeated 3 or 4 time and then it will run as it should. next load same thing occurs. any sugestions as to what would cause this. thanks
For model number nfw7300ww00
PartSelect logo
Hello Leland, Thank you for your question. Researching the model number that you have provided, there are several parts that can cause this issue, the door lock latch, the motor control board, the grounding microswitch, the drive motor, the drain pump, or the washer function control board PS11755972. Check the control boards for any visible damage or loose connections, and you can test the other parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755972
Manufacturer Part Number: WPW10525371
Brand
Model Number
Description
Inglis
IFW7300WW00
Washer - Residential, Automatic
Amana
NFW7300WW00
Washer - AUTOMATIC WASHER
Whirlpool
WFW9050XW00
Washer - Residential, Automatic
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service