Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ivan F - June 1, 2023
Verified Purchase
Drain Pump Replacement
Perfect replacement part. 15 minutes job. Thanks so much.
★★★★★
★★★★★
Richard K - January 14, 2019
Verified Purchase
very easy repair, 15 minutes start to finish
part came in quite fast considering it was ordered in the Christmas break. Simple fix, machine works great again
★★★★★
★★★★★
Andy D - August 10, 2018
Verified Purchase
Worked as expected
Perfect
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 14, 2017
Machine first shows a sud error, I know what this means. Machine clears itself, and then will show error code e01 followed by f09. This is while the machine is running empty. I cleaned all hoses leading to the pump, and also the drain hose. Tried machine, codes still flash. Two technicians looked at this machine saying its fine.. wrong. I installed a new pump... machine still flashes same error codes. All hoses are clean, new pump installed... What is my next step to solving this problem.. New mother board? This is a front end loader. Model # is mhw6000xg1.. When searching this, states incorrect model #.. this is what is on the sticker located behind the door.
For model number MHW6000XG1
Hi Scott,
Thank you for the question. When the washer goes into the drain cycle and the drain time is over 8 minutes and not reaching the reset level in the pressure switch then the drain pump will stop pumping out the water. This means there is a possible issue in the Drain pump, Pressure Switch, or the Electronic Control Board.
Since the pump has already been replaced you will need to look into the Pressure Switch Part number PS11752436 or the board PS6447843.
Hope this helps!
Should the impeller on the water pump have some play “wiggle room” or should it stay rigid with impeller axle? I’ve notice evidence of wear and was curious if the reason my washer wont drain is due to pump impeller damage
For model number Mhw6000xw2
Hello Michael, Thank you for your inquiry. There may be a little room but not very much. If the impeller shows signs of wear, you should probably replace the pump. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752769
Manufacturer Part Number: WPW10321032