Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Whirlpool, Amana.
Part# WPW10289387 replaces these:
AP6018779, W10289387
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Mary M. B - November 24, 2023
Verified Purchase
Replaced this part
Timing of delivery was great. Installation was also very easy.
Teresa K - November 9, 2023
Verified Purchase
Exact Match
The part was exactly the same as the one I was replacing. My machine is a little older so I was quite happy to be able to get the part. It arrived quickly and came it great shape. It took 10 minutes to replace. My machine now works perfect.
Lech O - September 2, 2023
Verified Purchase
Part easy to replace. Done in 5 min.
As promised, I received the part after one day excellent service. Just turn off the water and turn off the power before unscrewing the top cover. All you need is a screwdriver and pliers. Disconnect the hoses, then unscrew this part and replace in reverse order.
Anthony B - May 25, 2023
Verified Purchase
water inlet solenoid
genuine part worked perfectly no problem
Julio C - September 18, 2021
Verified Purchase
As described!!!!
As described
Amor J - September 10, 2021
Verified Purchase
Excellent service
Perfect. Thank you for the excellent service. You are my go to place. Keep up the good work.
Ty G - October 15, 2020
Verified Purchase
Easy repair
This was an easy fix, part was exactly what was needed. Arrived on time
Paul V - June 17, 2020
Verified Purchase
Fixed leak
Great part
Lei M - November 17, 2019
Verified Purchase
works great
The part is great, I fixed the leaking. Thanks.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water accumulateding in tub overnight.
Install new water valve. Cut water supply off and remove from back of washer. Remove 3 screws in the top panel from the back. Lift up about a inch and pull back. Comes right out. Set aside. Remove clamp from hose that secures hose to valve. Twist it to break contact and then work it off. Remove screw from the back that holds valve on. Pull up a little and remove wires/ connectors. Mark them or take a picture. Replace with new valve. Connect wires and push it into place. Easier if you put the screw back in that holds it. Put the hose and clamp back on. Put cover on and install the 3 screws. Hook up hoses, turn on water and call the wife. Lol
Other Parts Used:
-
Michael from WEATHERFORD, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was filling up with water when not on or running.
Removed old valve and replaced it following the directions provided. Then flushed out intake hoses and cleaned aerators. Easy repair. Your directions were very helpful and user friendly!
Other Parts Used:
-
Judy from Sagamore Hills, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
March 20, 2019
Seems like leaking, see drips from dispenser. How can i tell it it needs to be replaced? I see no obvious cracks
For model number Wfw945xw00
Hello Dan, thank you for your question. Sometimes the hoses at the back of the dispenser can become clogged with residue and cause the water that enters the dispenser to not drain quickly and can cause a bit of an overflow. We would recommend removing the top of the unit, remove the dispenser hoses and clean the dispenser well. You may also want to remove the hoses and clean them well. Inspect the area well at this time; you may find a crack or break toward the back of the housing. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
October 9, 2023
water does not stop filling even when unplugged what part do i need to replace
For model number wfw9470ww01
Hi Donna, thank you for contacting us. We have concluded that the issue is with the water inlet valve, part number PS11752082, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Daniel
February 18, 2024
During a wash cycle, the water doesn't seem to stop flowing into my machine (even the dispenser seems full). Turning the water source off and then back on seems to fix the problem temporarily, although I have to do that a few times during the cycle. I figure it's the valve that needs replacing, but was hoping for an expert opinion before I purchase one. Thanks in advance.
For model number WFW94HEXL2
Hello Daniel, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the pressure switch, part number PS11752436, before replacing the water inlet valve. It senses and controls the water level in the washer. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
Malcolm
December 3, 2022
I have replaced flowmeter on this washer did not work the water still does not cut when it goes thru the cycle where do i need to look next.
For model number WFW9400SW04
Hello Malcolm, thank you for contacting us. The issue is most probably related to the water level switch, part number PS11751539, or the water inlet valve, part number PS11752082. The switch senses and controls the water level in the washer while the inlet valve supplies the water according to requirements. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Larry
May 8, 2023
Washing machine (front loader) is making a loud knocking/grinding noise during spin cycle. Please advise.
For model number MHWE450WR01
Hi Larry, thank you for reaching out. Based on our understanding of the issue, we would suggest that you make sure the load is balanced. If there are light and heavy items in the same load, the tub will spin out of balance and become noisy. If that is not causing the issue, then you may need to ensure the washer is level with the feet sitting firmly on a solid floor. Level the appliance and adjust the legs if necessary. If the issue persists, then you may need to check the shock absorbers, part number PS11723173. Many front-load washer tubs use shock absorbers to dampen tub movement during operation. If one of the shock absorbers becomes dislodged or breaks, the tub may begin shaking and hitting the sides of the washer cabinet, making a loud noise when the appliance is in the wash or spin cycle. If any of the shock absorbers are faulty, you may need to replace them. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752082
Manufacturer Part Number: WPW10289387
Manufacturer Part Number: WPW10289387
Brand
Model Number
Description