Part Location Diagram of WPW10251314 Whirlpool Control Panel
See part 1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Control Panel

 Fits your 1CWTW4800YQ2 Washer!
$255.05
  Special Order
 Fits your 1CWTW4800YQ2 Washer!
PartSelect Number PS11751144
Manufacturer Part Number WPW10251314
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# WPW10251314 replaces these:
W10251314
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

9 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Curtis
January 7, 2019
What causes the load to become uneven even though they are very small? Then the machine vibrates and the tub bangs against the sides.Model# wpw10251314
For model number WPW10251314
PartSelect logo
Hello Curtis, Thank you for the question. The WPW10251314 is the part number for the control panel. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Joe Donachy
February 12, 2018
Lid lock light flashing washer wont cycle and have to pull electric plug and plug it back in to reset it
For model number W10251314
PartSelect logo
Hello Joe, thank you for your question. I would recommend replacing the lid lock assembly. If the lock isn't functioning properly the washer will not cycle. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
G
October 24, 2019
Tud is out of level
For model number W10251314
PartSelect logo
Hi G, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
George
October 24, 2017
Hot water will not fill whats wrong is there switch that’s bad
For model number Wtw4800bq1
PartSelect logo
Hi George, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the temperature selector switch, the water level pressure switch, the electronic control board and the lid switch. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
WILLIE
July 23, 2017
Recently clothes was unevenly distributed in the washer. The springs were in tack except 1, I put it back on all seems to work fine but it does appear higher or heavy on one side but it's not. Should the spring that was or needed to be replace or do all need to be replace?
For model number w10251314
PartSelect logo
Hi Willie, Thank you for the question! We recommend replacing all of the springs as having one off can strain the others and make then uneven. If you wish to send us the model number of the appliance we will be happy to provide you with the proper part numbers to the springs you need. Looking forward to hearing from you.

Was this helpful?
Thank you for voting!
Jonathan
August 1, 2018
Is it possible to by just the parts to fix my cold water intake valve or do i have to replace the entire assembly?
PartSelect logo
Hello Jonathan, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Curtis
January 7, 2019
What causes the load to become uneven even though they are very small? Then the machine vibrates and the tub bangs against the sides.
PartSelect logo
Hello Curtis, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Shelly
February 13, 2020
Why my machine keep filling and draining at the same time
For model number W10251314white
PartSelect logo
Hi Shelly, Thank you for your question. If your refrigerator is filling and draining at the same time, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the lid switch and depending on your model, you will need to check the water level switch, the pressure switch or the air dome tube. We hope this helps. Thank you and have a great day.

Was this helpful?
Thank you for voting!
Curtis
January 7, 2019
What causes the load to become uneven even though they are very small? Then the machine vibrates and the tub bangs against the sides.Model# wtw4800xq4
For model number WTW4800XQ4
PartSelect logo
Hello Curtis, thank you for your question. We would recommend checking the tub balance ring PartSelect Number PS11750502 and the suspension rods that go around the tub, which come in a kit when ordered. The part number for the suspension rod kit is Part Number: PS11703290. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751144
Manufacturer Part Number: WPW10251314
Brand
Model Number
Description
Whirlpool
1CWTW4800YQ1
Washer - WASHER
Whirlpool
1CWTW4800YQ2
Washer - WASHER
Whirlpool
WTW4800XQ0
Washer - Residential, Automatic
Whirlpool
WTW4800XQ1
Washer - Residential, Automatic
Whirlpool
WTW4800XQ2
Washer - Residential, Automatic
Whirlpool
WTW4800XQ4
Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service