Range Terminal Block WPW10245259

Hello Preston, Thanks for your question. This type of issue typically arises from loose wiring. I would recommend inspecting all of the range's wiring immediately to ensure nothing is damaged or still loose. Replace any wires that are damaged. I hope this helps.

Hello Pat, thank you for your question. If the start button isn't working properly, and you have to hold the start button we would recommend testing oven thermostat PartSelect Number PS11749737 first. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If that part measures within those readings, the electronic board should be replaced. I hope this helps!

Hello Tim, thank you for your question. If the top elements as well as the oven are not working, I would recommend changing the terminal block and perhaps the power cord to the unit. Also check the plug the appliance is plugged into to make sure the right voltage of power is coming to the unit. If the stove top burners are working but neither the baker OR the broil unit is working inside the oven section, the part you would need to replace is the Electronic Oven Control Board part number PS2357664. You may also want to check the Long Oven Sensor PS1570174. I hope this helps!

Hi Donald, For something like that you would have to contact a repair technician. It seems like the electronic control board on your appliance might have shorted out during your power outage. An appliance repair technician should be able to determine that for you without a problem. Good luck with your repair.

Hi Robert, Thank you for your question. There are some parts that you will need to check to see which one is causing the issue. You will need to check the terminal block, the oven sensor, the safety thermostat and the light socket. I hope this helps. Thank you and have a great day!

Hello Jeff, Thank you for your inquiry. I would recommend checking your burner and oven elements, the infinite switches, the oven sensor, the terminal block and the oven control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Good luck with your repair!

Hello Vincent, thank you for your question. The noise filter board is PartSelect Number PS4239674. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Denean, thank you for your question. We feel it may be the terminal Block part PS11750972 or the Electronic Control part PS16555254. For more specialized assistance or to speak have a qualified technician look at the unit, we would suggest calling the manufacturer of the unit directly. Good luck with your repair.

Hello Brad, thank you for writing. For this symptom you will want to consider either the Fuses, the Temperature Sensor, or the Electronic Control Board, but the model number you provided is a partial model number with multiple variations. Could you please provide the full model number so that we may look into the correct replacement parts? We look forward to hearing back from you.

Hello Terri, thank you for reaching out. Make sure that the wire connections to the control board are not faulty. If this is not the issue, then you may need to replace the oven control board, part number PS16555255, to solve the problem. Glad to be of assistance!