This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Crosley.
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.9
Filter By Rating:
5 Stars
16
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul M - September 9, 2024
Verified Purchase
The rite Element
Shipping Quick and parts perfect this is what you expect from this great supplier!
★★★★★
★★★★★
Gilbert R - July 17, 2024
Verified Purchase
Part was good, repair was tough.
Part works and looked like original element (what was left of it). Had to remove the wall mount oven/ microwave combo. You need to cut back the insulation to see mounting arrangement. Got tough with the housing as it was warped. Used a small wrecking bar to pry it open for removal and insertion of new element.
★★★★★
★★★★★
Ritchie M - April 18, 2024
Verified Purchase
Received partly quickly, installation went well…. Happy family here. Thank you for good service
All is well
★★★★★
★★★★★
SHAWN M - February 15, 2024
Verified Purchase
Came quick
Worked as expected
★★★★★
★★★★★
Clint M - October 9, 2022
Verified Purchase
This is not a particulary easy repair as a lot of dissasembly is required.
This repair took about an hour to do. 20 minutes to take the range apart, 5 minutes to install the element, and 30 minutes to figure out how it all goes back together! I also had to replace the thermistor as it had opened. This caused to oven element to self destruct as there is nothing in the oven control circuitry to stop the element from burning up. Make sure you check the thermistor if you have to replace the element.
★★★★★
★★★★★
Shawn R - October 2, 2022
Verified Purchase
Works perfect
Very grateful to get this at the price we did. Your return policy could use an additional 30 day return grace period though. I spent $90 on brackets that were not right and we were in vacation during the time they were delivered and it never got looked at u til day 63! Not the right parts. Now I’m stuck with them
★★★★★
★★★★★
Richard S - September 29, 2022
Verified Purchase
Exactly what I needed
Delivery was super fast. Very happy with this purchase.
★★★★★
★★★★★
Janet A - September 18, 2022
Verified Purchase
Oven element
The part fit perfectly and works great
★★★★★
★★★★★
Michael W - April 12, 2021
Verified Purchase
Easy order, correct part, shipping confirmation same day ordered
Part was correct one ordered, arrived in perfect shape 3 days after ordering. Well done.
★★★★★
★★★★★
Ron F - March 13, 2021
Verified Purchase
Satisfied with Product
Arrived promptly and easy to install when reviewed comments from other purchasers how to install.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 1.4 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Other Parts Used:
Tim from Langley, WA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Bake Element
The existing bake element was charred and in pieces so could not be pulled out. We destructively disassembled the range and pulled out the pieces along with the melted insulation. The wall behind was also scorched.
Other Parts Used:
Gary from NELLYSFORD, VA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
22 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
May 6, 2018
The bake element for this model is not inside the oven. Where is the access for this hidden bake element? I'm assuming it's in the back. Can you explain how to access and change the element. Please do not provide a link to the same video - it's not applicable to this model. Thank you.
For model number KESS907SSS04
Hi Greg, Thank you for the question. For the hidden element, you will need to pull the appliance out from the wall to access it from the back. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
August 12, 2019
Do you have instructions on installation of part w10207398 for the model kdss907sss05 ?
For model number KDSS907SSS05
Hello Jimmy, Thank you for the question. You will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 27, 2019
I am trying to replace the bottom hidden bake element on my KitchenAid oven and cannot for the life of me figure out how i am suppose to get it out. I have pull a few covers off the back and found the 2 element prongs sticking out the back and disconnected the wires. I move some of the insulation out of the way exposing 2 screws apparently holding it in. But now it will not come out any further and i am wondering if it is suppose to come out the front or the rear of the oven somehow. The video you keep listing to help people does not apply to this particular model.
For model number KESS907SSS04
Hi Mark,
Thank you for your question. There is a video on our website that you can reference on how to install the bake element. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
April 25, 2019
How to install bake element part# wpw10207398
For model number kebs107sss04
Hi Earl, Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
LOU
February 25, 2019
How do i remove oven rack : Ps 12348730 for cleaning
For model number KEBS207SSS00
Hello Lou, Thank you for your question. This is a slide out oven rack. You simply need to lift the rack slightly then pull it out of the oven. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 14, 2017
How do you get to the heating element to change it
For model number KDRS807SSS04
Hello Linda, thank you for contacting us. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps!
https://www.youtube.com/watch?v=aahcHBzTrk8
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
How do you remove oven bake element to replace
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
March 2, 2020
Is there a video available to replace the bake element for this model ?
For model number Kesk901sss01
Hello, Thank you for your question. You will want to first remove the screws from the back of the element where the bracket is, and then you should be able to just pull it out. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Russell
March 9, 2023
I have a KitchenAid model# KEBK206SBL04 serial number D14312624. Does this stove have a bottom element? The upper stove seems to not heat up properly. When cooking a pizza, the bottom doesn't get cooked, and the top usually gets burnt. If there is a hidden bottom element, I may have to replace it. If there is a bottom element is it difficult to replace it?
Thanks,
Russell
For model number KEBK206SBL04
Hello Russell, thank you for reaching out. We believe your oven is having this problem because the bake element may be faulty. We would suggest checking the bake element, part number PS11750370, and the temperature sensor, part number PS11748765. To access the bake element, you will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Thank you for your inquiry, good luck with this repair!
Do you have instructions on installation of part w10207398 for the model kdss907sss01 ?
For model number WPW10207398
Hello Yves, thank you for reaching out to PartSelect Canada. To install the bake element, part number PS11750370, you need to follow these instructions. Access the panel on the back of the appliance. Now move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and replace the element. Reinstall the tin panel and its insulation. Place the appliance back in place. Good luck with your repair!
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following brands: Whirlpool, ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750370
Manufacturer Part Number: WPW10207398
