Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Katherine C - August 20, 2023
Verified Purchase
Worked perfectly
It was very easy to repair and saved me buying a whole new microwave
★★★★★
★★★★★
CATHY K - September 29, 2022
Verified Purchase
Replacement
The part was exactly the same as the origjnal. Easy to replace. Looks so much better. This item is a plastic staess steel look alike. It is not stainless steel.
★★★★★
★★★★★
Ashley G - July 28, 2020
Verified Purchase
Repair was simple and effective. Handle works great noe
The part came as ordered. Glad I saved the screws though as it came with no mounting hardware at all, just the handle. I will be getting some clear caulking for extra durability, surprised it didn't come with any for the price paid but was shipped and delivered as I was advised. Overall pretty happy with the replacement and will contact this company again if I need other repair pieces.
★★★★★
★★★★★
Fernando B - May 22, 2019
Verified Purchase
Easy repair
Part ok
★★★★★
★★★★★
Les M - March 1, 2019
Verified Purchase
Microwave door handle
Part was as described. Fit perfectly.
★★★★★
★★★★★
Hanif L - November 7, 2018
Verified Purchase
Instructions for Install
The instructions for the install of the handle very useful and made my repair much easier. Thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken handle
Remove the door by lifting up the hinge side so that the two hinge pins disengage from the steel hinge brackets.This can be a bit fiddly so just keep wiggling the door until one of them pops off. Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle. Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door. Set teh new handle in place and tighten the screws down snuggly. Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Other Parts Used:
Raymond from Bishop, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
43 of 52 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Just very easy to do it
Open the door of the microwave and remove the plastic at the door and take the screws off ,and take off the old handle in put your new one screwed back that's it,do you see how Easy it is,like you say hello
Other Parts Used:
juvens from N MIAMI BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
November 11, 2021
Does this microwave door handle come with parts 6,7, & 8 as shown in the schematic or only part 6?
For model number MMV5207BAS
Hello Craig, Thank you for the question. This part included #6, #7 and #8 from the diagram. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew Hendrickson
December 28, 2019
I need to order a new microwave door handle for a Maytag model #mmv5165bas microwave.I found two references for what looks like the part i need. one is part number mmv5165bas15 the other says mmv5165bas14. my microwave does not show a 14 or 15 after the model number. which one do i need to order?
please advise.
thanks
For model number MMV5165BAS
Hi Andrew, the correct part is PS11749865. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fran
March 4, 2019
Do you have any other colors on this handle???
Hello Fran, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Donald
October 16, 2022
I need to replace the handle on my Amana Micro wave Serial #16252981NN
For model number MMV5207BAS
Hello Donald, thank you for contacting us. The door handle (stainless), part number PS11749865, will fit your model. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
